2013 STX 4X4 5.0 Supercab build
#11
Member
Thread Starter
Just installed am Airaid OE high flow filter last night. Didn't really see the need to post pick for that. The air filter box is a bit of a pain in the ***** to get into compared to other vehicles I've had but it worked out fine. too soon to tell about the mpg's. I'll fill up in a few days and keep an eye on that.
#14
Member
Thread Starter
I put mine on the inside of the driver's side bed rail dead even with the bed rail hole/pocket. I ran the cable from my CB, through the dash, behind and under the weather stripping and door sills, down through a rubber plug in the floor(I cut a slit in the center of the plug), out of the cB a short distance and up between the cab and the bed to the antenna mount. I'll take a few pics tomorrow and post them.
Last edited by troylee72; 01-04-2014 at 04:47 PM.
#15
Member
Thread Starter
The following users liked this post:
nihilus (01-25-2014)
#18
Member
Thread Starter
Headlights
Painted the backside rim of the headlights black to give the appearance of a black border all the way around the light and sprayed NiteShades and clear-coat on the side-marker.
#19
Grey and black is always an awesome combo! Radio is really cool. Looking into one for mine.
The following users liked this post:
troylee72 (01-15-2014)
#20
Junior Member
Join Date: Jan 2014
Location: San Ramon, Ca
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
I would start my own build thread...but I'm basically doing all the same mods as you so I'll just pretend this is my build thread. Im just running a bit behind. Lol