JMRRebuilders

Whats up guys here is the newest JMR REBUILDERS build series. Official Series 4 - Crown Vic and Coyote Swap into 1995 F150. In this series we are taking a 11 crown vic a 13 f150 and a 95 f150 and making it one.

The plan is to tare the cv front and rear ends and swap them into th 95 f150. While this won't be easy it will be from the help of Dave at Team321, Kyle at Outcast Autoworks and the brains of Dennis at Farmtruck Racing Texas.

Then after we accomplish the simple swap we will be pulling the coyote 5.0 and 6r80 transmission out of the 13 f150 and fitting it into the 95. This will all be possible with help again from Dennis at Farmtruck Racing Texas and Frank at PBH PERFOFMANCE.

Then when those easy task are done we will be putting the new 13 seats and console on the inside and having here repainted by the amazing guys at Straight lines.

If there is anything you want to know or want to help contribute please by all means drop your knowledge on us. Just like our other builds I will try to keep the post updated as we go. Really appreciate the support wr get from yall.

JMRRebuilders

Here is the first piece of the JMROYOTE puzzle. We won rhe bid on this 2011 crown vic police interceptor at 800 bucks. It has 143k miles and as you can see was in great shape until we started tearing her apart. We named this one the black beneficator.

JMRRebuilders

Alright we have seen the blue beneficator and now it is time to show the next piece of the JMROYOTE. We purchased a 2013 F150 line bed. It has the 5.0 and the 6r80 tranny. Not sure there isn't a body panel that wasn't damaged on this bad boy. The good news is the low milage on this bad biy and wining bid price. It only has 80k miles and we got it from 3800. Not bad if you ask me. Check her out and let us know what you think.

JMRRebuilders

Here is the first episode in our massive build this season. We are taking a crown vic a 13 f150 coyote and 6r80 and fitting it all in a 95 f150. This week we our new Project is "Mostly" revealed. Let me give you some hints. Coyote, F150, Police. You won't believe it when these pieces come together!

JMRRebuilders

This episode was a bit of a goof off session but we reveal our new toy or I mean tool. Hope yall enjoy it by the way watch out for the wrecking ball. Introducing... the New Gantry! What should be our first job? Winching up Ryan of course! He came in like a wrecking ball!

JMRRebuilders

Here is the the reveal of the truck we will be doing all this swapping to. Maybe we are niave or maybe wishful to think we can swap this in our driveway but who knows we might could. Let us know what you think. We drove 7 hours to picking up our next build - the 1994 F150 that will get a Crown Vic front end and Coyote Swap. Don't miss this quick walk around.

JMRRebuilders

This week we jump into removing the crown vics front suspension. It wasn't as easy as we thought but helped we had sold the 4.6 and tranny already. Thankfully we had the gantry cause without it would not have been fun. This week, the work begins on our Crown Vic Swap for our 1995 F150. We had a ton of fun, with our new Gantry, picking up the entire front of the car and rolling out the front end of our Crown Vic!

1995GreenMachine

How’d I miss the 94 being a short bed?! Can’t wait to see where this goes!

JMRRebuilders

Heck yeah brother its also a 95. Jason keeps putting the wrong year to torment me. Appreciate the support

JMRRebuilders

This was a big episode we got the front clip, motor and trans out. It was a heck of time but the good news is very little rust. Hope yall enjoy this episode. Removing the bed and engine on our coyote swap f150 was a piece of cake, but the front clip was a pain! I'm exhausted just writing about removing the engine from our 1995 F150.