trapshooter

All in all what will the total cost of just the body be? Ie. hood, fenders, grille etc?

05Raptor

The whole Fiberwerx kit is $1300. The glassworks fenders are $475. So subtract the fenders from the Fiberwerx kit, and I should be back around $1300. Plus headlights which are around $250. So for the whole front end after taxes, around $1600.

trapshooter

And rear end?

patclarke

just remeber that all the body work will be fiberglass and not metal. Fiber glass is much thiner and bends. It may have just been my huge 1 piece clip on but my hood and bedsides would rattle and shake A LOT! I had to have some supports built for the bed sides and the hood to keep them from shaking.

05Raptor

The whole Fiberwerx kit is $1300. The glassworks fenders are $475. So subtract the fenders from the Fiberwerx kit, and I should be back around $1300. Plus headlights which are around $250. So for the whole front end after taxes, around $1600.

05Raptor

The rear will come later, because I will have to do a TON of fabrication to the bed and frame to shorten it. But as far as the parts go, I need fiberglass bedsides ($500) tail lights ($125) and a stock tailgate ($???). In addition I will fabricate my own bumper. So total for the rear is around $1000. Or I could just buy a full raptor bed (if I can even find one) and just cut a foot out of the frame and call it a day.

trapshooter

How much wider would the front end be then the rear end if you left the rear end stock?

Jkry2121

How much for those kc lights?

05Raptor

It should be 3.5" wider per side. It will look a little dorky at first, but not too bad because the tires don't stick way out past the fenders.

05Raptor

I paid over $150 originally for them, so I would like to get close to $100 out of them. That will include the wiring and switch.