patclarke

I just placed my order from Brenthel. I gave them a $3500 deposit. The kit should be ready to install by next month. The kit out the door with every thing I need to drive away with front and rear suspension is $20,109.56. We are doing 3.0 king shocks in the rear and 2.5's in the front

Front

F14R04 Kit Front
F14R0408 04-08 4WD Ford F150
Long Travel System, Includes
-Boxed Upper Control Arms
-Boxed Lower Control Arms
-Custom Fabricated Upright (Eliminating all ball joints)
-Hardware Kit: Heims, Monoballs, Misalignments, Bushings, Crush Sleeves.
-Extended Brake Lines
-Stainless steering adapter with tie rod
-Custom axles
-930 Race CV joints
-Custom CV adapter
- Sheetmetal Custom boxed shock mount
5,199.00 5,199.00T
Install - Kit Removal of old parts, Cut out stock coil bucket, weld in shock bucket, install
limit straps, weld on bump stop mounts, relocate battery, windshield wiper
box, cooler overflow. Weld washers onto lower pivots. Cycle suspension
throughout travel for clearance. Install brakelines, bleed brakes, install new
tie rods or extensions.
1,850.00 1,850.00
KING - 2.5 Coilover King 2.5" Coilover 2 635.00 1,270.00T
KING - 2.5 Bypass King 2.5" Bypass 2 tube. 10" stroke piggyback 2 575.00 1,150.00T
KING - 2.5" Bumpst... KING 2.5" Bumpstops with cans 2 325.00 650.00T
Engine Cage Removable Engine Cage 400.00 400.00T
0.00 0.00
0.00 0.00
04-08 4WD F150 Race kit 10,519.00
F1SU-04 - Kit


Rear

F1SU0408 04-08 Ford F150 Spring under kit. Includes Brenthel Industries shackles,
perch mounts, lower spring plates, Shock Mount that needs to be welded
underneath bed. Custom Deaver leaf springs for this kit.

2,899.00 2,899.00T
Install - Rear SU Kit Take apart all leaf springs, cycle suspension to properly to Mount Shocks to
rear axle, cycle for proper driveshaft lengths, weld kit, install brakelines &
bleed system
950.00 950.00T
KING - 3.0 Pre - By... KING 3.0 2- tube bypass 2 995.00 1,990.00T
KING - 2.5" Bumpst... KING 2.5" Bumpstops with cans 2 325.00 650.00T
Drivelines - Driveshaft Custom Driveshaft with U-Joints 1,150.00 1,150.00T
Custom Fab - Bumps... F150 Rear Bumpstops Installed with gussets for frame. 599.00 599.00T
8,238.00

Lucky575

Damn!!! Your going to have one nice setup when its all done!!

patclarke

Thank you. I sure hope so. This is the most money I have ever spent in my whole life. I just hope I dont end up regretting it. My whole family thinks I'm crazy and ask if I secretly want to be a race car drive lol. I think Im going to have a shop install a CAI, power chip, and regear to 4.88's next week.

thewrubelator

Oh man that thing is gonna be nasty.

patclarke

Just purchased a few more goodies.

K&N CAI for $305
Edge programer for $449
4.88 gears front and rear $1700 (Installed)

Should all be installed next week. I would have loved to have had a full exhaust installed but that Brenthel long travel suspension is setting me back $5k more then I had anticipated.

Barnabas

I CANT WAIT TO SEE THE FINISHED PROJECT!!

Whats happening to the screwed up body work??

patclarke

I am looking for a shop that will build me some type of engine cage that the hood will mount to. I have not found one yet. As for the paint that will be pushed back for a while.

JCT1990

Cant wait to see this thing finished

buster096

What's the travel numbers on the rear kit? And honestly 3.0's is over kill. You could have gotten away with 2.5's with no problem in the rear.

patclarke

I know it is 16" in the front but I cant remember if it was 16" or 18" in the rear. I thought it was weird that we are doing 2.5s in the front and 3.0s in the rear but I just put my trust in there recommendations because I have never don any thing like this before.