t.jackson

if anyone doing this mod could pictures to go along with this thread (awesome write up btw, looks like u put a lot of time into it) it would be a wonderful help!

or if theres another thread on this somewhere else, any info is helpful thanks!

Buell25RR

Has anyone grounded the tb too? Since it is computer controlled instead of cable. At least on the 5.4 3v it is I can't say for any others.

mblouir

Sorry for the delay guys. I've been inactive for a while. I'll go out tomorrow and take pics of what I have now. While it won't be as in-depth as the first set of pictures, but they should help out enough to allow one to get the job done.

t.jackson

thanks man i'd sure appreciate it, im sure im not the only one

mblouir

No problem. Like I said it won't be as in-depth. The only crucial thing missing, though, is the prep work. Stuff like cutting the cable to length, proper crimping/soldering, etc. Not rocket science, but it's good to see how that stuff is done.


It's been a while since I made the thread, so I am unable to edit the first few posts. I'll post them up when I get them edited and get a moderator to add a message and link to the post that contains the pictures.

t.jackson

sounds good, thanks again!

mblouir

Okay guys here are the updated pics. I've messaged Jon to add a message from me into the first post so that anyone that opens the thread sees it first and can easily find this post. Let me know if you have any questions. Hope this helps some of you out. The pictures should be self-explanatory when it comes to cable locations, but let me know if you have any questions. I'll repeat what I said in the original post: this isn't a set-in-stone way....it's the way I did it.

cltgt

Looks like i have a project...

99lingenfelter

Great post. Looks like I've got a new weekend project.

ak_cowboy

The new pics worked out great, but I'm having trouble figuring out where you put the wire for the Engine block to Ground on the engine...