|
How To: Swap cluster needles.
7 Attachment(s)
I posted a "how to" a while ago on how to put LED lighting into your dash cluster. It worked out great except for one thing... my orange needles wouldn't show up with my blue lighting no matter how many LEDs I put behind the cluster. So I came up with a solution.
It was suggested to me to find an old set of Ford cluster needles that were white and swap them into my cluster. Sounded easy enough so through Ebay I purchased a '97 Ford Explorer cluster for $25 and got to work. There was a lot more work than I thought... So the cluster arrives and I take the dash apart to throw in these new needles. Problem #1. The stems on the new white needles are too short to connect up with my dash needles in my 07 f150. Attachment 526899 So I had to get creative. I took out my factory needles and took them apart. I took the entire stem "assembly" (stem plus flat part which connects to orange needle part) and shaved it down so I could glue it to the new needles. In order to get this to work I first had to get rid of the stem on the white needles. The quickest and easiest way was to get out the ol' drill. Attachment 526900 With the stems drilled out, I then sanded them down to make a smooth surface. With some trusty super glue I then attached my OEM stem to the 97 needle. Attachment 526901 Attachment 526902 With all of this done, I let them dry for a few minutes and then reassembled the whole thing. Needles are finicky to reset and the cluster must be plugged in before you stick your needles back on. Try to remember where the needles sat before you took them off for easier placement. Minor adjustments can be made while the truck is running to move gauges to the appropriate places. These positions will be held until the cluster is unplugged again at which time you will have to reposition them again. I put my needles on as a group moving from needle to needle and pushing down a small amount each time I move through the group. This makes sure you don't push a needle too hard or too far. Needles on, the truck looked fantastic. The cluster looks awesome now with those darn orange needles gone. Attachment 526903 Attachment 526904 Attachment 526905 I just remembered there was one needle that came in my 97 cluster that had a metal stem on it. I tried to drill it out like the other ones but that didn't work so well so I just cut it off with a hack-saw and that made my life a lot easier. In total, it probably took me 30 minutes to do this and the work was definitely worth it. It was a cheap alternative to buying a new cluster for my truck. Including the LEDs, I have spent ~$35 and now have a custom cluster. |
Needles
Nice job.... you did yours a bit different than I didn mine and explained to ya, still looks good though...NOTE: If you have a FX2, FX4, or cluster with the rings around the needles the needles will have to be cut down @ 1/4 inch as the 90's model mirrors are longer. You used needles with plastic collars (what did they come off?) I use ones off cougars, explorers, f150's ect and they have the metal post you spoke of....
After you take the back of the stock needle off, drill the flat side 1 size smaller than the width of the 95 needle stem******DON'T GO TOO DEEP OR THE NEEDLE WONT GO BACK ONTO THE FATORY CLUSTER***** just enough for the 95 needle to press all the way in... before you press it all the way in, grind/cut off the extra flat material, this will let more light to the neele to let it shine brighter! After your needles are assymbled, then match up with the length of the factory needle heads and take the extra off the 95 needles. Then installon the cluster.. place a fork under the needle to keep from pushing it down too far!! will look like this when done..but what ever color bulbs you installed http://www.f150online.com/forums/mem...om-cluster.jpg |
Havn't done this on my F-150 but on my 98 s10 when I did this I was able to take a razor blade to the orange on the needle and scraped it right off to the clear / white finish and it was able to shine thru...
|
needle color
the color runs all the way through on the f150's
|
I bought a '97 ford explorer cluster off of ebay and when it came I took the needles off and only one of them had the metal backing on it.
Great idea with the fork too! I should add that in there |
Are did you get all the needles to give the correct information out? Such as gas/speedometer/etc.
|
I memorized the positions of the needles as they were when the truck was idling. For gas/temp/voltage I just put them on when truck was off so I knew where they'd go.
|
Looks good guys.
|
Is it possible to put LEDs behind a 2002 FX4 and then would this needle mod also work? Thanks in advance
|
|
| All times are GMT -4. The time now is 02:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands