Tony150

U don't need internet for the livewire program to run

aliass24

Im saying that you can remote connect with Mike in your driveway with internet access and he can have everything set up before you leave.

zimmer0

iTrader: (1)

I'm aware
This may be a solution if i cannot get it working today. thanks

zimmer0

iTrader: (1)

Just got done logging both of my tunes. Some good and some bad results

Perf Chill 87 Octane: aboslutely 0 knock at cruise or WOT, checked with both LiveWire and Torque App. Very satisfied with that. A/F ratio was around 85-86. Not sure how that compares to where it needs to be but it was running great.

Economy Chill 87 Octane: very little knock with conservative driving, WOT shot up to 8-8.5 in 2nd and again in 3rd. Not going to be running this tune until revisions are made. You can definitely tell the difference just in the sound of the motor.

Glad i got this datalogged before my 6hr road trip this afternoon.
Big thanks to [MENTION=121844]Ecofx86[/MENTION]

zimmer0

iTrader: (1)

Come to find out livewire doesnt detect individual cylinder knock on how the mpt perf tunes are setup. So I may have had some knock with the perf tune it just wasnt registering.

jwanck11

High KR is but just one thing you don't want to see...

I am not going to post what I know on knock. It will just get muddied with a lot of misinformation. I will 35K' it to say in your post above, that level is disconcerting.

LTNBOLT

You must be getting the string of all "0" 's under the knock sensor column.

zimmer0

iTrader: (1)

Correct, livewire only detects global knock not individual cylinder knock which is how the MPT perf tune is setup. Anyone else have this issue?