Gauges for Ecoboost
#1
Gauges for Ecoboost
Looking to install a Boost gauge and a A/F wideband gauge for my 13 Ecoboost. Who here has installed them already, or may have input on what brand would best work for the Eco? And if I didn't want to put then in my air vent or side dash pod, where else could be applicable? -
-John
-John
#7
Member
I did the AEM digital boost gauge in red because I liked how the gauge trim matches ours pretty well and red is obviously spot on with 2013+ interiors to make it look almost like it is OEM.
Trending Topics
#8
FX4 SCrew TT'd V6
I just installed my T-Stat last night again and when I was checking if I had any air in the system I cranked it up on Hi through the Vents only, and they flowed pretty well still. I will say, there was a little noise on the HI when flowing through the vents, but I have NEVER heard it before using Auto which is what I use 99.9999999% of the time.
#9
Member
that's good... i think you can manually crank the blowers louder than auto will ever take them so your set :-) nice work.
I just installed my T-Stat last night again and when I was checking if I had any air in the system I cranked it up on Hi through the Vents only, and they flowed pretty well still. I will say, there was a little noise on the HI when flowing through the vents, but I have NEVER heard it before using Auto which is what I use 99.9999999% of the time.
#10
I believe the newer front 02 sensors are now a wideband vs the old narrow band so just log these PID's on a livewire or X4 to see what you have.
Trucks have a MAP sensor also I believe so should be able to log boost also.
Trucks have a MAP sensor also I believe so should be able to log boost also.