SoCal Tunes!!!!
#1361
Member
I finally went WOT with my stage 1 SoCal tune, checking for any knock counts, which with my knock count app for torque showed no knock.
This tunes is way faster than any tune I have from LMS without a doubt. And this is just the stage1 not the 5 or 5H.
This tunes is way faster than any tune I have from LMS without a doubt. And this is just the stage1 not the 5 or 5H.
#1362
That pretty much describes the way mine shifts--I like it. In this town the speed limit is 35 on the main streets, before mine would constantly shift back and forth between 4th and 5th at that speed unless I locked out the OD's. Now it just stays in 4th, which I like. This shifts just about as ideal as possible for my driving.
Last edited by ECOmax; 08-04-2013 at 10:13 PM.
#1363
I have been pretty happy with his shift strategy so far.
Before, if I took a turn or small curve at slow speed and then gave it some gas it would be super touchy and I would make the truck jerk forward.
Now it feels like stock when I do it.
There were time if I cruised at 40mph and coasting in 4th gear, if you gave it gas sometimes it feel like it would do a hard downshift. It would still be in 4th so I can only assume it was the torque converter.
That is now gone too. (It didnt happen all the time..but on a certain stretch of road I could usually replicate it)
Before, if I took a turn or small curve at slow speed and then gave it some gas it would be super touchy and I would make the truck jerk forward.
Now it feels like stock when I do it.
There were time if I cruised at 40mph and coasting in 4th gear, if you gave it gas sometimes it feel like it would do a hard downshift. It would still be in 4th so I can only assume it was the torque converter.
That is now gone too. (It didnt happen all the time..but on a certain stretch of road I could usually replicate it)
Last edited by ECOmax; 08-04-2013 at 10:17 PM.
The following users liked this post:
Last Rites (08-05-2013)
#1364
That plugin is garbage. Doesn't work
#1365
Senior Member
Join Date: May 2013
Location: Somewhere Awesome with lots of traffic
Posts: 302
Likes: 0
Received 55 Likes
on
32 Posts
Torque app works good on my vehicles, the kicker with that is a good obdII dongle.
I love how on the SoCal tunes you can load up with boost and avoid a downshift, especially on the hwy
I love how on the SoCal tunes you can load up with boost and avoid a downshift, especially on the hwy
#1366
Senior Member
Ok fellows me and Shawn have a good base tune going.... damn box codes are something else I tell you... my sticker says KTW4 but it ended up being KTW5 which has the same strategy code. It may take a few stabs but have confidence in Shawn bc he will get it no matter what the case is. Now we have a good base tune thats running faster then a spotted azz ape In a jet plane.On top of Shawn getting it right he done ALL this on a Sunday!! Now tell me one other tuner that would even think about doing that! One h3ll of a man ill tell u. Shawn is going to look over it and put all the goodies in it.. seems like it has most then them. Going play with the shifting later on. I wanna give matth shifting strategy a go.
On a side note...IF you feel or think anything is not right first things first pick up the phone and give Shawn a call! He cant fixed something he doesn't know about. ...
SHAWN (562) 305-3532.___ Socal Tuning= the best out there.... give him a shoot you want be disappointed!
On a side note...IF you feel or think anything is not right first things first pick up the phone and give Shawn a call! He cant fixed something he doesn't know about. ...
SHAWN (562) 305-3532.___ Socal Tuning= the best out there.... give him a shoot you want be disappointed!
Last edited by bayourunner; 08-05-2013 at 08:33 AM. Reason: added to
The following 2 users liked this post by bayourunner:
Boosted Limited (08-05-2013),
brucesears (08-05-2013)
#1367
Inebriated 4 ur safety
Bayourunner. Have you ever have a Superchips device in your truck or taken it in to the dealership to get an ECM update?
#1368
#1370
Member
I can't get the live link to run on my laptop, it says I need to have Microsoft.net framework 4.0, but when I try and install that it say download didn't succeed. So I don't know how I'm gonna data log. Any ideas?