I installed a UPR oil catch can system, I get a to. Of oil out of the can. Is this a problem? It's full within a 1000 miles

 

Full in just a 1000mi is excessive IMO. How many miles do you have on your truck, and what brand and type of oil do you run?

 

It has 24,000 miles on her and I run royal purple 5W20 full synthic

 

That's wayy bad!!

 

Take it back to the dealership and say what?

 

Does the truck use a lot of fuel? Do you do a lot of towing or racing?

 

No I get great fuel economy, and neither, back and forth to work and road trips

 

Rite on. Is this the first time you have checked the catch can?

 

No I have had it since 16,000ish and I was still running motorcraft 5W20. And I guess I really didn't think it was consuming alot first. I think it's getting worse with every mile. I checked it like every 2,000 and not much and again other 2000 to much. Then changed to full synthic at 22500ish but was still filling up with motorcraft oil too. I have to admit I'm pretty scared

 

Yeah something is not jiving... I would check the PCV, and make sure it's working properly. Also make sure the air fiter is good and clean too. If those are functioning properly, I would get a compression test and a leak down test then go from there.