Moving the CAC on the Ecoboost to allow for a hidden winch
#11
There is a Mod that I would love to add to my truck. It's a hidden winch that mounts behind the lower opening on the bumper. The problem is that on a Ecoboost that opening is for the CAC airflow. Does anybody know of a kit that relocates the Factory CAC or has anybody moved there CAC up infront of the radiator?? Here is a link to the hidden winch http://www.roughcountry.com/images_l...ate_1010-v.jpg
stock intercooler is in the way of the winch and mounting bracket, remove this
^^winch mounting bracket that gets installed in the stock IC location, and bolts directly to the frame rails
this photos shows the winch mounted on the bracket, bolted in place. you can see the intercooler pipes on either side of it. It is important to note that you have to take care when wiring the winch and controller so the wires and terminals can not come near the intercooler and short out on it. also the silver connect/disconnect lever can pop-out to give you more clearance
If you haven't already looked it looks like full race has done it!
http://www.full-race.com/store/ecobo...ler-kit-1.html
http://www.full-race.com/store/ecobo...ler-kit-1.html
Last edited by Full-Race Geoff; 01-10-2013 at 05:41 PM.
#12
Member
I don't know much about the dynamics of the CAC, but looking at the pics, can't you just add tubing/hose with clamps and move the CAC up more, in front of the grill?
#13
^^ not possible, it wont fit. you are welcome to try it for yourself however!
#15
King Hater
#16
Member
DIY Intercooler relocation and winch install.
There is a Mod that I would love to add to my truck. It's a hidden winch that mounts behind the lower opening on the bumper. The problem is that on a Ecoboost that opening is for the CAC airflow. Does anybody know of a kit that relocates the Factory CAC or has anybody moved there CAC up infront of the radiator?? Here is a link to the hidden winch http://www.roughcountry.com/images_l...ate_1010-v.jpg
. If you have any questions, just send me a message. Hope all is well and take care!
https://www.f150forum.com/f119/2-7-3...-winch-526195/