Had my cutout redone, super sexy metal work inside....
#1
Rasslin
Thread Starter
Had my cutout redone, super sexy metal work inside....
For you guys with an Ecoboost that want to be quiet 99% of the time but loud when you want it, this would work perfect on a set of catless downpipes right after the Y joins to a single exhaust
This is a Sound and Performance boost activated cutout seen here:
http://www.spracingonline.com/store/...ctivated_/3673
When over 6psi the cutout opens up - here's my video on it working on my stock downpipes with a bad H pipe install and on 91 octane tune at around 12psi. I haven't had a chance to test it yet with the new 23 psi tune. Previously this cutout picked up .2 and 2 MPH for me in the 1/4 mile in back to back testing. I like this versus a loud exhaust so I can have a quiet exhaust 99% of the time and loud when I want it.
This is a Sound and Performance boost activated cutout seen here:
http://www.spracingonline.com/store/...ctivated_/3673
When over 6psi the cutout opens up - here's my video on it working on my stock downpipes with a bad H pipe install and on 91 octane tune at around 12psi. I haven't had a chance to test it yet with the new 23 psi tune. Previously this cutout picked up .2 and 2 MPH for me in the 1/4 mile in back to back testing. I like this versus a loud exhaust so I can have a quiet exhaust 99% of the time and loud when I want it.
The following users liked this post:
wilkinda (02-26-2014)
#4
Senior Member
How much is that art work worth?
#5
Rasslin
Thread Starter
I can replicate for around $600, the prototype piece was almost double that though PLUS the $400 3" cutout from Sound Performance which I bought months ago.