How To: SCT Livelink Datalog
The following users liked this post:
Reflections Detail (08-12-2013)
#53
Senior Member
I guess maybe a little off topic, but is there a way to monitor any of the temps like cats or anything on the livewire? Just wondering if there is a way to load any other PID's to this thing. I guess I have more use for something like watching a temp than throttle position. I know you could read them on torque app so I know there is a sensor..
#54
Senior Member
If knock value is negative is that showing degrees of retarded timing?
Another words, is negative knock bad?
Also, do I convert kPa to Psia then subtract 14.7 to get Psig for boost?
Another words, is negative knock bad?
Also, do I convert kPa to Psia then subtract 14.7 to get Psig for boost?
#55
better looking than geno
Thread Starter
Opposite, negative will add timing, positive will reduce timing. But they are not always linear, ie 3 degrees of knock will not always reduce timing 3 degrees.
Boost, roughly yes.
Boost, roughly yes.
#57
Senior Member
I know it's been talked about before, but I can't find it....my search-fu is weak on the mobile app.
#58
I guess maybe a little off topic, but is there a way to monitor any of the temps like cats or anything on the livewire? Just wondering if there is a way to load any other PID's to this thing. I guess I have more use for something like watching a temp than throttle position. I know you could read them on torque app so I know there is a sensor..
I am aware the config file will log a lot more parameters based on what we choose, but would be nice if I could also monitor those same parameters live from the gauges display. I.e - Knock, EGT, etc
#59
Paint Polishing Guru
I can't get the config file that corey made to load to my device. It sees the device, but gives me the error it can't comm with the device. Have the newest firm 155.2 or so.
errr!
Greg
errr!
Greg