Fiber cover / oil pan shield (Ford p/n FLIZ-5D032-B)
#1
Junior Member
Thread Starter
Fiber cover / oil pan shield (Ford p/n FLIZ-5D032-B)
I own a 2013 F150 Super Crew with the 3.5L EcoBoost engine. What is the purpose of the fiber cover/oil pan shield underneath the back part of the engine and the front part of the transmission? I've been told the nomenclature is "Cover" and the Ford p/n is FLIZ-5D032-B.
#2
Junior Member
Thread Starter
Can anyone verify the nomenclature (name) and p/n (part number)? Also, has anyone tried to get Ford to replace it on their dime? The lub techs at two different dealers did not fully turn the quick connect screws (180° turn not 90° turn) and it has fallen down twice, got scraped up by the road and Ford does not want to accept responsibility. WTF?
#3
King Hater
It's a sound dampener. Most guys take them off as they are in the way and fall off after time.
I have mine in my shop that you can have if you want it. Just pay shipping.
I have mine in my shop that you can have if you want it. Just pay shipping.
#4
Junior Member
Thread Starter
RCI Offroad
Thank you for the offer, but I don't really want another one of these "things" on my vehicle.
I'm thinking about getting the RCI Skid Plates. Do you (or anyone else) have any experience with the RCI Skid Plates?
I'm thinking about getting the RCI Skid Plates. Do you (or anyone else) have any experience with the RCI Skid Plates?
#5
King Hater
#6
Can anyone verify the nomenclature (name) and p/n (part number)? Also, has anyone tried to get Ford to replace it on their dime? The lub techs at two different dealers did not fully turn the quick connect screws (180° turn not 90° turn) and it has fallen down twice, got scraped up by the road and Ford does not want to accept responsibility. WTF?
#7
On my 2018 3.5 the front diaper was just total crap droopy trash, I tried to fix it with epoxy and fiberglass, but it was still marginal at best.
I replaced it with the skid plate kit from the STX.
Now back onto the horrible design diaper that needs to come down every oil change and breaks a lot, I replaced that with the following. I used the 2018 version from the site, but I linked here to the one for the 2013 version you have. https://www.etsy.com/listing/5839875..._click=1&frs=1
I replaced it with the skid plate kit from the STX.
Now back onto the horrible design diaper that needs to come down every oil change and breaks a lot, I replaced that with the following. I used the 2018 version from the site, but I linked here to the one for the 2013 version you have. https://www.etsy.com/listing/5839875..._click=1&frs=1