Who else is tired of hearing about the 5.0?
#1
Senior Member
Thread Starter
Who else is tired of hearing about the 5.0?
But Mom all the other 2011+ engines have one, why can't we?!
Great engine, great sound, lots of aftermarket potential
I for one can't hear enough about this thing!
Great engine, great sound, lots of aftermarket potential
I for one can't hear enough about this thing!
#2
#5
#6
Senior Member
The 300 was pretty tough, until condensation builds up under the distributor, but that's nothing a dry cloth wouldn't fix.
#7
Senior Member
Join Date: Jan 2012
Location: Jenks,OK
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
Those I6 300's were torquey. Drove a couple of shortbed ext cab 4x4's with the 5 speed. You could almost just let out the clutch without any throttle to take off in first.
Trending Topics
#8
Senior Member
True. My brother has a 85 reg cab 4x4 4 speed with a 92 efi engine and it was the same way. But it didn't make much power past 3k rpm. 4k if you really pushed it. That was a strong motor. While 4 wheeling the transmission slipped out of gear once and pegged the tach at 6k because his foot was to the floor and it had no ill affects on it.
#9
Ahhhh....... The 427 SOHC "Cammer". Throw on dual four-barrel carbs from the parts counter at Ford and make 657 hp at 7,500 rpm and 575 ft lb at 4,200 rpm. A Hemi's worst nightmare.
Last edited by BlueOval84; 02-09-2012 at 08:13 PM.