Topic Sponsor
2011+ Engine Related Questions Sub-Forum to the new engines that debuted in 2011.

Blew my engine and replacing with Ford Racing Crate Engine

Thread Tools
 
Search this Thread
 
Old 04-12-2014, 10:00 AM
  #11  
Member
Thread Starter
 
Mitch03's Avatar
 
Join Date: May 2012
Posts: 31
Likes: 0
Received 7 Likes on 5 Posts

Default

Mrposi - yes it is a newer engine. I had a chance to get a used one with 33,000 miles but didn't want another 2012 issue. I hope the new one works better in the rain and humidity but I doubt it. So the sensor on the side of the turbo is for the BOV? Thanks for the replies!
Old 04-12-2014, 10:11 AM
  #12  
Member
Thread Starter
 
Mitch03's Avatar
 
Join Date: May 2012
Posts: 31
Likes: 0
Received 7 Likes on 5 Posts

Default

13twin - yes. The typical shudder issue and failing on it face. I did drill the hole in the intercooler to address the condensation issue and it helped. But the engine has always been inconsistent. Some days it runs like a bat out of hell and other days it stubbles.
Old 04-12-2014, 10:12 AM
  #13  
FX4 SCrew TT'd V6
 
mrpositraction's Avatar
 
Join Date: May 2009
Location: Janesville, WI
Posts: 1,999
Received 125 Likes on 91 Posts

Default

Originally Posted by Mitch03
Mrposi - yes it is a newer engine. I had a chance to get a used one with 33,000 miles but didn't want another 2012 issue. I hope the new one works better in the rain and humidity but I doubt it. So the sensor on the side of the turbo is for the BOV? Thanks for the replies!
That what it looks like. The 11/12 had an internal bypass, the 13's don't. I was just under my truck checking my exhaust bolts and my 13 turbos are just like the ones you have pictured.

The rain issues are going to be more intercooler related, so you aren't going to see any changes there. Also, I have seen 13's fail in the same manner.
Attached Thumbnails Blew my engine and replacing with Ford Racing Crate Engine-darien-20140317-00365.jpg  
Old 04-12-2014, 10:20 AM
  #14  
Member
Thread Starter
 
Mitch03's Avatar
 
Join Date: May 2012
Posts: 31
Likes: 0
Received 7 Likes on 5 Posts

Default

Mrposi - thanks for all your help! I will let my shop know so we can address that.
Old 04-12-2014, 10:31 AM
  #15  
Senior Member
 
13'TwinScrew's Avatar
 
Join Date: Feb 2013
Location: NC
Posts: 1,071
Received 153 Likes on 103 Posts
Default

IMHO, the single best thing that you could do after the install is get a aftermarket CAC....it will may not "Stop" the condensation issue....buuuuut it will go a long way to prevent it and keep it at more constant state.
Old 04-12-2014, 11:58 AM
  #16  
Senior Member
 
FoX2012's Avatar
 
Join Date: Jun 2012
Location: MD
Posts: 190
Received 14 Likes on 11 Posts

Default

Are you sure that crate engine is for the F150? I only ask as the transverse mounted ecoboost motors found in the Flex/SHO have garrett turbos. T thought all F150s had borg warner turbos regardless of year.

Last edited by FoX2012; 04-12-2014 at 12:01 PM.
Old 04-12-2014, 12:17 PM
  #17  
Member
Thread Starter
 
Mitch03's Avatar
 
Join Date: May 2012
Posts: 31
Likes: 0
Received 7 Likes on 5 Posts

Default

Fox2012- yes it's for F150. M-6007-35T. I agree with you on the BW, but these come with Garrett GT 15 and I think 48mm.
Old 04-13-2014, 10:38 AM
  #18  
Member
Thread Starter
 
Mitch03's Avatar
 
Join Date: May 2012
Posts: 31
Likes: 0
Received 7 Likes on 5 Posts

Default

Thanks for the replies. I knew this would get interesting. The crate engine comes complete with everything you need....I think except wiring harness and ecu. It has a electronic gas pedal, tubing, coolant reservoir. You name it. 2 large boxes if stuff. I'm sure the piping and BOV is included also. I called ford before i purchsed and they said it would hook right up.....we will see next week. But then again, they did know anything was wrong with the ecoblewst.
Old 04-13-2014, 12:57 PM
  #19  
Senior Member

 
jwanck11's Avatar
 
Join Date: Jul 2010
Posts: 1,204
Received 325 Likes on 223 Posts

Default

So, is the difference of this being the "racing engine" bigger turbos alone? Apologies if I missed the rest.
Old 04-13-2014, 06:58 PM
  #20  
Senior Member
 
redmist's Avatar
 
Join Date: Nov 2012
Posts: 110
Received 46 Likes on 19 Posts
Default

Whos tune were you running.


Quick Reply: Blew my engine and replacing with Ford Racing Crate Engine



All times are GMT -4. The time now is 11:39 AM.