Are speaker upgrades worth it? 502a package
Audio guys -
I have a 2017 Lariat 502a, with the "upgraded" Sony system. I know this is a far cry from a "good" system by those who get into this stuff; but, I'm wondering if swapping speakers would make much of a difference? If "yes" - are there recommendations? If "no" - is there anything you would do to this system to improve the sound? Thanks. |
Originally Posted by 2017ExecFx4
Audio guys -
I have a 2017 Lariat 502a, with the "upgraded" Sony system. I know this is a far cry from a "good" system by those who get into this stuff; but, I'm wondering if swapping speakers would make much of a difference? If "yes" - are there recommendations? If "no" - is there anything you would do to this system to improve the sound? Thanks. Morel Tempo Ultra 602's in the front. Just wire them up in the factory location. No need to use the supplied crossover. The Sony amp/dsp already takes care of that. Don't worry about replacing the rear speakers either. They are only there for fill. Just replacing the front components will make a huge difference in output and clarity. |
Speaking of "rears are there for fill" do you fade your speakers to the front? If so, how much?
|
Originally Posted by rsylvstr
Speaking of "rears are there for fill" do you fade your speakers to the front? If so, how much?
|
YES ! I replaced mine with Infinity Ref 8632cfx, amazing difference
|
What did you do with the center channel? Did you replace that also? Really interested in hearing from others that just replaced the speakers, the B&O sound is just not great. I would like to replace all of them if possible.
|
I went with JL c2 650 components in the front and JL c2 350x for the center. I actually have an extra one if you're interested.
|
Originally Posted by black0utF150
(Post 6023405)
I went with JL c2 650 components in the front and JL c2 350x for the center. I actually have an extra one if you're interested.
|
I actually left the factory tweeters. I don't have the sony/b&o so I would have needed to either run wires to crossover or installed inline.. But you will need to get a universal tweeter mount and do some minor fab to get it to fit in the A pillar.
|
Originally Posted by black0utF150
(Post 6032390)
I actually left the factory tweeters. I don't have the sony/b&o so I would have needed to either run wires to crossover or installed inline.. But you will need to get a universal tweeter mount and do some minor fab to get it to fit in the A pillar.
|
All times are GMT -4. The time now is 08:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands