When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not to side track this thread, but it kind of related. How well do the light bars work behind the grille? I've been wanting to add a light bar, but wasn't sure of the output from behind the Raptoid grille.
Output is pretty good actually. there a SLIGHT loss obviously but the mesh pattern is so open it works well.
My 40" is awesome at the bottom but 30" along the top of the grille is great too. I use one or the other not at the same time... there more for show than function. one GOOD light bar is all you need.
Was -35 putting it on and I gave up doing side 2. and since then I have decided I'm making a fog like replacement kit and I need the other one loose for making the brackets ;-)
Output is pretty good actually. there a SLIGHT loss obviously but the mesh pattern is so open it works well.
My 40" is awesome at the bottom but 30" along the top of the grille is great too. I use one or the other not at the same time... there more for show than function. one GOOD light bar is all you need.
Are those Hanning single row light bars? I may need to hit you up for some of those.
you should get the raptoid LEDs. they fit and shine perfect. what happened to your third LED. it seems to be falling off. It's another kit right? With Reid's kit it will shine out and not light up all the innards of the grill
Yes I am. 1.25" BORA's. The wheels have a 34 mm offset so that adds another 10mm over the stockers. All considered I am about 1.6" wider stance each side before tires.
Last edited by goneMINIcrazy; 04-20-2015 at 12:24 AM.
04-16-2015, 02:06 PM
