OneTon

Hi All:

I saw a cool mirror on a mid '80s F250 4X4. I talked to the owner and he said they were on the truck when he bought it...

They mount like standard 2-point "breakaway" mirror. But instead of having a loop made of bent flat steel, the loop is made of stainless tubing. The tubing comes off the top mount at an upward angle and at about 8'' away from the door bends downward vertically 10''-12''. Then bends in to the lower mount point.
This mounts a "standard"* mirror head using a clamp. The mirror head can be moved up or down the length of the vertical part of the tube.

I don't think they are made anymore. Heck, I've only seen the one set.
Any info about these would be appreciated. I've been looking for these for 9 months now...

OneTon

*Bracket on the back vs. pin comming out of the bottom

Ty

have you searched google?


with out a picture, I have NO idea what you are talking about, sory.

OneTon

Thanks for the fast reply...

Yea, I've looked everywhere I can think of... I didn't have my phone so I don't have a picture. Attached is a .jpg of the stock mid 80's mirror. The flat steel loop is replaced with a tubular loop that heads away from the door in an upward angle

Thanks
OneTon

Ty

posibally a oem ford option?