rrbb99

Forgot to mention… The name of the shop is HPP Racing in Lewisville, TX. Manny is the owner and does the tuning. They have customers all over the country bring their cars for customizing!!!

GulickTJ14

Hey i just had this same install done but they never put my purge valve back on. so my question is where does the stock vapor line on the driverside of the motor go if you put the 3/8 hose from the purge valve on that port.

rrbb99

I had the same issue. Remove the vacuum purge valve from the stock intake. Connect the vacuum line that runs along side the fuel line, on the drivers side of engine, to the same place on the purge valve it was connected before... Then connect the other vacuum line to the intake. I installed a cold air intake, so the place on the intake where the vacuum line connects is in a different location. After in stalling the purge valve, I had it just sitting on the top passenger side of the intake. After looking at someone else's pics, I moved it under the intake opening (reference the pics I attached). Hope this helps.

rrbb99

This is where you can put the purge valve.... I zip-tied the valve under the throttle body.

GulickTJ14

So the line that runs next to the fuel rail on the driver side goes into the purge valve

rrbb99

Another pic... I removed the CAI and it was much easier to install with more room to work.

rrbb99

Here's where the vacuum line connects to intake.

rrbb99

This pic shows how I routed the vacuum line on the drivers side of intake from under the throttle body....

GulickTJ14

Which port on the purge valve does the line from the driver side go onto

rrbb99

[QUOTE=GulickTJ14;3412452]Which port on the purge valve does the line from the driver side go onto[/QUOTE

I apologize!!! I just saw this question. Drivers side hose will only fit properly on the correct port on purge valve. It clicks in to place because of the connection.