asutrent

there are tons and tons of threads on this topic... look at any mustang forum. dry kits are sold complete... typically you just need to run a few wires to the dash for switches, mount the bottle, run the hose line to the air intake (drill hole), and run a safety purge out of cab from bottle. Mount a WOT switch that activates the system on wide open throttle, mount the relay and there you have it. That is the basic basic set up. There are tons of other ways to give this a go or add accessories from here (remote opener, bottle heater, purge values etc...)

Just google and you will find step by step instructions... Same with all vehicles for the most part..