5.4 Intake Plenum
#14
A has been that never was
Just buy an AEM CAI. That kit will delete the ugly *** plenum, its silencer, the intake tube and the whole ugly air box. All that for half of what you need to play for that stupid plenum.
The AEM is bad *** because it does not retain the lower part of the air box and plenum
The AEM is bad *** because it does not retain the lower part of the air box and plenum
#15
Senior Member
Join Date: Jul 2010
Location: Michigan
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
#16
Just buy an AEM CAI. That kit will delete the ugly *** plenum, its silencer, the intake tube and the whole ugly air box. All that for half of what you need to play for that stupid plenum.
The AEM is bad *** because it does not retain the lower part of the air box and plenum
The AEM is bad *** because it does not retain the lower part of the air box and plenum
So i know this thread is super old but ha. Im puting a crate motor in a 2003 expy with 4.6 and the plenum gasket comes with metal grommets In the gasket when my plenum has them IN the plenum.(not removable at all) The one i got from AA also has grommets in the gasket. Punched the grommets out well the ones on the plenum are too thick for the gasket by .030 and will bottom out on the upper intake b4 the gasket every hits.? any ideas?