Topic Sponsor

My 4.9 just died and will not start

Thread Tools
 
Search this Thread
 
Old 10-24-2011, 07:14 AM
  #11  
Junior Member
 
MiguelP's Avatar
 
Join Date: Apr 2011
Location: jensen beach FL
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default

Maybe you ICM? had the same problem a year ago. replaced it and its been running since
Old 10-24-2011, 12:09 PM
  #12  
Okie.
 
Welder7018's Avatar
 
Join Date: Nov 2010
Location: Woodward, Oklahoma
Posts: 14,908
Received 42 Likes on 42 Posts

Default

To check if injectors are working pull all spark plugs and have someone in the cab cranking it over if you smell gas they are working... Check for spark also. And starter. Basically run through all the basics
Old 11-13-2011, 03:07 AM
  #13  
Junior Member
 
BgTg0515's Avatar
 
Join Date: Sep 2011
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

I have this very same problem on my 93 F-150 with the 300-I6. I left for work and it just died 1-block away. The spark plugs are getting good fire.I can spray ether in and it fires right up.I recently replaced one fuel pump but no go, PLEASE HELP, I'm baffled.
Old 11-24-2011, 10:58 PM
  #14  
Race Red '12 XLT SCrew EB
 
EBinMT's Avatar
 
Join Date: Oct 2011
Location: MT
Posts: 738
Received 12 Likes on 11 Posts
Default

crank position sensor? I had one go out on my beater truck. it had the same symptoms.
Old 11-26-2011, 05:57 PM
  #15  
Senior Member
 
Tote-M-Pole's Avatar
 
Join Date: Jul 2010
Location: Michigan
Posts: 190
Likes: 0
Received 0 Likes on 0 Posts
Default

Old blue,

You most likely have a fuel pressure problem. Check the pressure when you are trying to start the truck. If it drops off when you are trying to start the truck it is most likely the pressure regulator.
oleblue4
Old 11-27-2011, 11:25 AM
  #16  
Senior Member
 
rikard's Avatar
 
Join Date: Jun 2011
Location: North Reading Ma
Posts: 360
Received 17 Likes on 17 Posts

Default

When the truck is trying to start the computer completes the injector circuit by grounding. If the TPS is sensing WOT the injectors won't fire. You can test the TPS with an ohmeter (good) or with a voltmeter (better). It uses a 5v ref voltage with closed throttle being about 1v and WOT 4.8v, (thats what it is on my 95).
regards
rikard

Last edited by rikard; 11-27-2011 at 12:48 PM.
Old 11-28-2011, 06:08 PM
  #17  
Member
 
papa tiger's Avatar
 
Join Date: Nov 2011
Posts: 32,108
Received 239 Likes on 223 Posts

Default

kick panel by passenger right foot, switch has red button on it, reset it to get fuel pump working.



Quick Reply: My 4.9 just died and will not start



All times are GMT -4. The time now is 02:13 AM.