Longarms

I'm pulling the rear block on my 4x4, so I need some 2wd u-bolts to replace them with. On Tasca parts, the diagram shows rounded u-bolts, instead of squares.

Anyone buy them form Tasca before? Are they really round? I mean.. it would work, but that just seems silly. If they are round, I might as well get them from McMaster-carr for $2.

http://www.tascaparts.com/partlocato...layCatalogid=0

Spong

Just curious if you ended up getting these U bolts from Tasca? I'm also looking to removed the rear blocks from my 2013 4x4 and use shorter 2wd U bolts.

UNBROKEN

iTrader: (1)

That post was from 2011 and that guy hasn't been on here since 2014. I don't think you're gonna get an answer.

Spong

OK, I didn't realize he hasn't been here since 2014! Thanks

focusr3

I just re-used the 4wd bolts I had a deep enough socket to torque them back up. Then in the future if need be i just through the blocks back in.

Spong

I could do that but I would rather have new u bolts on there that aren't too long. I will save the stock parts in case I ever want to raise it back up.