Looking for the best bolt on 2'' Drop Shackles for 2018-2019
#11
I didn't have to notch my bed supports, I've had them on for a couple weeks now.
The shackle will contact the bed support as it goes up and down on the lift (2 post) but once it's on the ground it no longer contacts the support.
#12
Geek for hire
Did you get vibrations with this kit? Some of the kits come with shims for the rear end to make the angle correct.
I have the same truck and I installed the Max Trac 411420 and got exactly 2 inches of drop.
I didn't have to notch my bed supports, I've had them on for a couple weeks now.
The shackle will contact the bed support as it goes up and down on the lift (2 post) but once it's on the ground it no longer contacts the support.
I didn't have to notch my bed supports, I've had them on for a couple weeks now.
The shackle will contact the bed support as it goes up and down on the lift (2 post) but once it's on the ground it no longer contacts the support.
#13
Junior Member
Thread Starter
The following users liked this post:
Full Boost (03-25-2019)
#14
Junior Member
Thread Starter
I have the same truck and I installed the Max Trac 411420 and got exactly 2 inches of drop.
I didn't have to notch my bed supports, I've had them on for a couple weeks now.
The shackle will contact the bed support as it goes up and down on the lift (2 post) but once it's on the ground it no longer contacts the support.
I didn't have to notch my bed supports, I've had them on for a couple weeks now.
The shackle will contact the bed support as it goes up and down on the lift (2 post) but once it's on the ground it no longer contacts the support.
#15
I contacted Max Trac before ordering the shackles and specifically asked if I would need shims.
I was told that some trucks may need them and others not.
Last edited by gandyj; 03-15-2019 at 12:08 PM.
#17
Geek for hire
The Ford Performance (Ground Force makes them) come with shims for the vibration issues.
I feel a little vibration between 20-25 miles per hour when slowing down, but I don't notice it when accelerating.
I called contacted Max Trac before ordering the shackles and specifically asked if I would need shims.
I was told that some trucks may need them and others not.
I called contacted Max Trac before ordering the shackles and specifically asked if I would need shims.
I was told that some trucks may need them and others not.
#19
Junior Member
Thread Starter
I have the same truck and I installed the Max Trac 411420 and got exactly 2 inches of drop.
I didn't have to notch my bed supports, I've had them on for a couple weeks now.
The shackle will contact the bed support as it goes up and down on the lift (2 post) but once it's on the ground it no longer contacts the support.
I didn't have to notch my bed supports, I've had them on for a couple weeks now.
The shackle will contact the bed support as it goes up and down on the lift (2 post) but once it's on the ground it no longer contacts the support.
#20