Lets see those lowered RCSB 2015+
#12
#13
I had Belteck 3/5 kit installed on 2016 super crew cab 2 wd and now back is lower then front. Front rides nice, back rides like crap, bottoms out and just rides terrible. It needs to be raised in back about 1" to level it and get it off the stops. Does anybody have any ideas?
#14
Blown Member
Here is my 2016 RCSB dropped 2 3/4" in the back with dearched rear springs and 1 3/4" in the front with the Belltech struts set at a 2" drop. I have the option to drop it 1" more in the rear with shackles to make it only 1" higher in the back than the front. I was also able to use the cam adjusters of the front end alignment so I didn't have to notch the alignment slot longer.
Last edited by LTNBOLT; 07-21-2016 at 12:21 PM.
#15
I guess I'm going to bump this back up to the top, but I used a lot of information from this thread to make the choices I made with lowering my truck. I've had the truck for less than a month and feel like it's a completely different truck. So here's some before and after pics. Djm front control arms with 3" drop and crown 5" flip in the rear with calmax drop shocks.
The day I brought it home...
Less than 3 weeks later...
The day I brought it home...
Less than 3 weeks later...
Last edited by 5.WHOA!!!; 09-14-2016 at 10:18 PM.