When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just got it finished. So had the ground force 1.5/2.5 kit originally. Put the Belltech 1001sp on. Did the rear flip first and actually was almost level, the rear was 1/2” lower. Did the front and adjusted the struts down for a slight rake. Used Fox shocks in the rear and used my Ground Force lowering springs with the Belltech struts up front. I can honestly say the ride is as smooth if not slightly smoother then the Ground Force kit. No vibration, rides nice, looks good. I’m very pleased with the results.
Wheels are Dub 20x9 +30. 305/50/20 tires. No running at all. Running caltrac bars, still need adjusting, but they are pretty dam low. I’m going to set them and may end up cutting some of the lower bracket off
I just got my kit installed yesterday and the front looks a little higher then the rear but I’m assuming I have to wait and see how it settles. I don’t have any vibrations and no problems. I did notice that when I go over bumps the front makes a rattle noise but everything feels fine. Any ideas on that? I will post some pics later today if it isn’t raining.
So here it is the same 2/4 Belltech kit. The mechanic told me to wait a little bit and see if the front would settle a little bit. New wheels go on Friday.
05-15-2019, 08:10 PM
