Any Ford Lowering questions post here 65-2015 trucks.
05-01-2010, 08:38 AM
#42
Junior Member
Join Date: May 2010
Location: Fairfax, VA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
2010 fx2
Thanks for answering the various questions. I, too, want to lower my F150. Truck is used for towing and daily driver.
1) 2010 FX2, supercab
2) 2wd
3) want about 2/4" lower
4) less than $1000
5) best combo for good ride, no problems.
also, would love to read install directions before purchase.
rich
1) 2010 FX2, supercab
2) 2wd
3) want about 2/4" lower
4) less than $1000
5) best combo for good ride, no problems.
also, would love to read install directions before purchase.
rich
05-01-2010, 10:20 AM
#43
F150 SUSPENSION GURU
Thread Starter
Thanks for answering the various questions. I, too, want to lower my F150. Truck is used for towing and daily driver.
1) 2010 FX2, supercab
2) 2wd
3) want about 2/4" lower
4) less than $1000
5) best combo for good ride, no problems.
also, would love to read install directions before purchase.
rich
1) 2010 FX2, supercab
2) 2wd
3) want about 2/4" lower
4) less than $1000
5) best combo for good ride, no problems.
also, would love to read install directions before purchase.
rich
djm 2/4 with belltech street performance shocks and front/rear belltech swaybars $950 shipped if you see it anywhere for cheaper shipped ill beat it.
05-02-2010, 11:20 PM
#44
Senior Member
Join Date: Dec 2009
Location: charlottesville, virginia
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
05-02-2010, 11:22 PM
#45
F150 SUSPENSION GURU
Thread Starter
i need to know what tire it is 255 50 20?
i really dont know if you will have rubbing issues because i dont know your wheel offset or width or even tire size.
05-03-2010, 12:24 AM
#46
Senior Member
Join Date: Dec 2009
Location: charlottesville, virginia
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
well you hit the nail on the hammer its 255/50/r20 and offset im not 100% but its flush with the wheel well it doesnt stick out more then the body i looked the wheels up and i cnt find the off set they are gitano g14's
05-03-2010, 12:27 AM
#47
F150 SUSPENSION GURU
Thread Starter
the 3/4 i have on my f150
front springs
rear shakcles and hangers
belltech shocks all around
$595 shipped
If you see it anywhere for cheaper shoot me a link ill beat anyones prices
front springs
rear shakcles and hangers
belltech shocks all around
$595 shipped
If you see it anywhere for cheaper shoot me a link ill beat anyones prices
05-05-2010, 01:33 PM
#48
I have an 89 F150, Reg cab, 2wd short bed.
I did the flip kit for the rear which is the little "u" bracket and now i'm sitting on my frame.
It dropped me more than 5inches. What is the problem? I called DJM techline and they couldn't think of nothing.
I did the flip kit for the rear which is the little "u" bracket and now i'm sitting on my frame.
It dropped me more than 5inches. What is the problem? I called DJM techline and they couldn't think of nothing.
05-05-2010, 06:06 PM
#49
F150 SUSPENSION GURU
Thread Starter
did you or old owner pull any leafs?
05-05-2010, 06:21 PM
#50
Senior Member
I just saw an episode on Truck U where they lowered a 010 Supercrew 1 inch front and 2 inch rear with Beltec struts, shackles and shocks. I want to do this to my 010 as well.
Do you have that set up and how much is it?
Do you have that set up and how much is it?