Any Ford Lowering questions post here 65-2015 trucks.
#2541
Norcal- I bought the 1001HK kit from you back in January. I have about 4,000miles on it now. I'm getting some squeaking/creaking from the rear/. Noise only happen when coasting off throttle. Does not make any sounds when accelerating or braking. Noise occurs coasting over bumps. Any ideas?
#2542
F150 SUSPENSION GURU
Thread Starter
Norcal- I bought the 1001HK kit from you back in January. I have about 4,000miles on it now. I'm getting some squeaking/creaking from the rear/. Noise only happen when coasting off throttle. Does not make any sounds when accelerating or braking. Noise occurs coasting over bumps. Any ideas?
#2545
1) 2016
2) 4x4
3) 2/4
4) dont know
5) doesn't matter.
im running a 1.5" shorter spring in front, and rear blocks already removed.
looking for another 2-3" front drop, and another 2" in rear
2) 4x4
3) 2/4
4) dont know
5) doesn't matter.
im running a 1.5" shorter spring in front, and rear blocks already removed.
looking for another 2-3" front drop, and another 2" in rear
#2546
Hey Norcal. Just starting my research on the lowering kit options. Looking forward to your input.
1) 2018 King Ranch
2) 4x4
3) 3 and 5
4) Competitive, how low can we get it?
5) no preference
Ride comfort is important, this is my daily driver and the wife is not a fan of bumpy roads. And on the other hand, I really like crisp handleing, and really dislike the feel of driving a battleship that floats around every corner. I had custom f/r sway bars on my Audi A4 if that tells you anything. :-)
1) 2018 King Ranch
2) 4x4
3) 3 and 5
4) Competitive, how low can we get it?
5) no preference
Ride comfort is important, this is my daily driver and the wife is not a fan of bumpy roads. And on the other hand, I really like crisp handleing, and really dislike the feel of driving a battleship that floats around every corner. I had custom f/r sway bars on my Audi A4 if that tells you anything. :-)
#2548
Senior Member
1) what year truck? 2019
2) 2wd or 4wd? 4WD Supercrew
3) how low do you want to go? 2/4
4) budget you want to be in?
5) Belltech
Looking for a 1001SP. I've bought a few kits from you now. Wasn't able to send you a message for some reason...
2) 2wd or 4wd? 4WD Supercrew
3) how low do you want to go? 2/4
4) budget you want to be in?
5) Belltech
Looking for a 1001SP. I've bought a few kits from you now. Wasn't able to send you a message for some reason...
#2549
Senior Member
I have the Belltech flip kit with the lift hanger in the front of the leaf, for a 4” flip total. Looking at the crown flip kit the hanger goes to the rear of the leaf. Can anyone verify this? I’d like to remove my front hanger and put a rear hanger in. I don’t want to remove and go to 5”, but I need the front hanger removed due to my traction bars attaching too low to the ground.
#2550
Guys ive done a lot of drop kits on the ford trucks over the past 15 years. Any questions you have any year truck just shoot it here. 2wd or 4wd ive worked with both so just ask and I'm glad to help. Not only do I install/sell these kits I offer 24/7 support so if you want to call me at 415 519 2432 feel free to do so.
Just need you to answer below questions so I can give you the best answer.
1) what year truck?
2) 2wd or 4wd?
3) how low do you want to go?
4) budget you want to be in?
5) belltech or djm item or both doesn't matter.
Here goes the suspension order page I will be adding pics up shortly
http://www.tbssowners.com/store/inde...ewCat&catId=15
Just need you to answer below questions so I can give you the best answer.
1) what year truck?
2) 2wd or 4wd?
3) how low do you want to go?
4) budget you want to be in?
5) belltech or djm item or both doesn't matter.
Here goes the suspension order page I will be adding pics up shortly
http://www.tbssowners.com/store/inde...ewCat&catId=15
1) what year truck? 2012
2) 2wd or 4wd? 4WD
3) how low do you want to go? 3,5 would be nice, but 2.4 would be acceptable.
4) budget you want to be in? Not looking to break the bank, but still want quality
5) belltech or djm item or both doesn't matter. Doesn't matter