When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Rear is a 2 inch shackle and block removal for a total of 3 or 3.25 depending on block height.
So a 4 inch flip will lower it 2 more inches in rear and will require the shorter shocks
front the belltech struts will give 1 inch more but will need to elongate the hole so aligns
Total for the kit with shims is $660 all belltech
anything else just holler
Thanks, I'll give you a call as would prefer Fox or other shocks for the rear, also only need an additional 1" in the rear vs 2" so wondering if a lift shackle will solve that for me.
Thanks, I'll give you a call as would prefer Fox or other shocks for the rear, also only need an additional 1" in the rear vs 2" so wondering if a lift shackle will solve that for me.
no sorry. The flip is a lift hanger and shackle. so it will drop about 2" more than what you have now.
I have a 91 F150 XLT Lariat with the 5.0 in it. I plan on using the DJM dream Beam kit for a 3/4 drop, bilstein shocks and new bushings all the way around. My question is this, what size wheels and tires can I stuff under the rear without doing any cutting? I also have a built 351 going in which will be making upwards of 570 HP, so I want to have something wide enough to give good road traction. I am wanting to go 12.5 wide at least, if not 13. Have any intel for that sir?
I have a 91 F150 XLT Lariat with the 5.0 in it. I plan on using the DJM dream Beam kit for a 3/4 drop, bilstein shocks and new bushings all the way around. My question is this, what size wheels and tires can I stuff under the rear without doing any cutting? I also have a built 351 going in which will be making upwards of 570 HP, so I want to have something wide enough to give good road traction. I am wanting to go 12.5 wide at least, if not 13. Have any intel for that sir?
on the djm kit ill save you money over anyone else that for sure.
Looking for a lowering kit for a 18 f150, screw, 5.0, 5.5' bed, 2wd. Has fender lips and do not want the truck to look like its setting lower in the back than the front. Will possibly upgrade with air lifter bags because I will be towing 24' trailer that weighs around 7000 lbs. Interested in the bell tech 3/4.
Open to suggestions.
Last edited by JDCoon; 05-25-2018 at 12:48 AM.
Reason: wrong link
Anyone know of any bolt on helper bags for a 5" flip kit on a 2018 F150. I have seen someone have some custom made ones to work which I might do if I can't find a kit.
I have already contacted a few companies to see if theirs will work.
I wont be towing with the truck just want to prevent bottoming out.
05-11-2018, 11:31 AM
