Any Ford Lowering questions post here 65-2015 trucks.
#2421
F150 SUSPENSION GURU
Thread Starter
As long as it doesn't hurt the integrity of the shackle I'm ok with that. I don't do any heavy hauling with the truck.
Speaking of mods, in a previous post it was stated that the dream beams narrow the front end. Is that still the case and if so will I need to modify anything other than possibly the the tie rods?
Speaking of mods, in a previous post it was stated that the dream beams narrow the front end. Is that still the case and if so will I need to modify anything other than possibly the the tie rods?
just the rods nothing else.
#2422
F150 SUSPENSION GURU
Thread Starter
15 SCrew
2/4
$600 - $1000 if bags are needed
Plan on running 22s or 24s and towing about a 400lb tongue weight camper.
Will Add a Leaf kit work? or would i need Helper Bags and if so, would i need custom mounts for bags, or do they have a kit that bolts right up?
Thanks
2/4
$600 - $1000 if bags are needed
Plan on running 22s or 24s and towing about a 400lb tongue weight camper.
Will Add a Leaf kit work? or would i need Helper Bags and if so, would i need custom mounts for bags, or do they have a kit that bolts right up?
Thanks
djm arms
rear belltech flip
rear belltech shocks
850 shipped
before i set up final kits i always have the customer measure from ground to fenderlip. You might need a 3/4 kit due to the different leafs/springs ford used on these trucks
#2424
Sorry if this has been asked a million times but i want to remove the rear blocks on my 18 f150. Ive googled and youtubed but no real firm answer, can i just remove the rear block and re use the stock U bolts or do i have to buy shorter ones? Thanks in advance
#2425
F150 SUSPENSION GURU
Thread Starter
will need fully threaded u bolts
#2426
#2427
06 Mark LT
4wd
2 front 3 rear
open budget
belltech
Can I do a 2 drop with belltech 2-3 springs without modifying the mounts?
Want to use stock Setting on bilsteins. possible?
Thanks!
4wd
2 front 3 rear
open budget
belltech
Can I do a 2 drop with belltech 2-3 springs without modifying the mounts?
Want to use stock Setting on bilsteins. possible?
Thanks!
#2428
F150 SUSPENSION GURU
Thread Starter
#2429
#2430
Lowering
I have a 2014
f150 Screw 6.5' bed
ive always been a lifted truck guy. Had a 6" rough country lift on my last truck, but I have 2 kids now and was looking at something adjustable for lowering so it's easier for the wife and kids to get out. I was thinking about the belltech air jack but I honestly have no clue what to get really. I want it to be adjustable so I can also go on the farm. Thanks for the help. Not looking to spend over 1k
f150 Screw 6.5' bed
ive always been a lifted truck guy. Had a 6" rough country lift on my last truck, but I have 2 kids now and was looking at something adjustable for lowering so it's easier for the wife and kids to get out. I was thinking about the belltech air jack but I honestly have no clue what to get really. I want it to be adjustable so I can also go on the farm. Thanks for the help. Not looking to spend over 1k
Last edited by Riser4321; 05-01-2018 at 11:33 PM.