Any Ford Lowering questions post here 65-2015 trucks.
#1891
Mine looks quite close to yours. I'll see if I can get pics of the shackles and stops today here is the truck as purchased. I did some research and am looking at the Monroe MA777 air shocks and an air lift kit. I'm using this for a work truck. And may tow a utility trailer occasionally.
#1892
F150 SUSPENSION GURU
Thread Starter
Mine looks quite close to yours. I'll see if I can get pics of the shackles and stops today here is the truck as purchased. I did some research and am looking at the Monroe MA777 air shocks and an air lift kit. I'm using this for a work truck. And may tow a utility trailer occasionally.
#1893
Im pretty sure these are longer than stock shackles. <br/>And there is a pretty severe thrust angle wedge between the spring and axle.
#1894
I lowered my 2014 FX2 with the DJM lower control arms and I have a noise from the front end. It's a popping noise. From what I have found, I appears to be an issue with the front sway bar and the end links. The end links are totally maxed out - bending in both directions. Anyone else lowered their 2014 with the DJM control arms have problems? I am fed up and about to cut either my end links or sway bar
#1896
F150 SUSPENSION GURU
Thread Starter
I lowered my 2014 FX2 with the DJM lower control arms and I have a noise from the front end. It's a popping noise. From what I have found, I appears to be an issue with the front sway bar and the end links. The end links are totally maxed out - bending in both directions. Anyone else lowered their 2014 with the DJM control arms have problems? I am fed up and about to cut either my end links or sway bar
Did yiu remove endlinks to test? Sounds like balljoint
#1898
F150 SUSPENSION GURU
Thread Starter
#1899
Senior Member
Would Belltech front lowering struts work on a Raptor?