2015 DJM and Belltech 1000sp
#11
#12
so what does that come out to lowered in the rear? I”m getting mine lowered in a week or two and just wanted to see what the 2/4 drop looks like. Was debating on if I wanted the full 3” drop in the front. I like a little rake with the rear being higher.
#13
I threw away the paper that had the measurement of the rear when I had the brackets for the 4" set up but I can get you a measurement on the way it sits now if that's what you're asking?
#15
Attachment 543047
Finally got my truck dropped with my DJM 3" A arms and Belltech 1000SP kit. My truck was only about 1.5" worth of rake from factory so i figured 1" with struts and 3" with A arms plus the 5.5" flip kit would sit it flat.
This is what it looked like when i went to pick it up. They hadn't installed the Belltech shackles so the rear dropped 7" and he did all 6" in front. Needless to say the front air dam was on the ground.
It is being raised back up so i can still use my truck as a truck. 1.5" in rear and 2.5" front.
More pics to follow.
Before shot
Attachment 543049
Finally got my truck dropped with my DJM 3" A arms and Belltech 1000SP kit. My truck was only about 1.5" worth of rake from factory so i figured 1" with struts and 3" with A arms plus the 5.5" flip kit would sit it flat.
This is what it looked like when i went to pick it up. They hadn't installed the Belltech shackles so the rear dropped 7" and he did all 6" in front. Needless to say the front air dam was on the ground.
It is being raised back up so i can still use my truck as a truck. 1.5" in rear and 2.5" front.
More pics to follow.
Before shot
Attachment 543049