18 RCSB 4x4 questions....
#12
Senior Member
Well it wasn't exactly a video and this article was printed in 2013 so a lot may have changed. I did recently contact them regarding the 2015+ F150 4wd.
http://www.maxtracsuspension.com/blo.../#.XH8YadpKjIU
The photo in this article is clearly a motorcraft half shaft.
http://www.maxtracsuspension.com/blo.../#.XH8YadpKjIU
The photo in this article is clearly a motorcraft half shaft.
#13
Well it wasn't exactly a video and this article was printed in 2013 so a lot may have changed. I did recently contact them regarding the 2015+ F150 4wd.
http://www.maxtracsuspension.com/blo.../#.XH8YadpKjIU
The photo in this article is clearly a motorcraft half shaft.
http://www.maxtracsuspension.com/blo.../#.XH8YadpKjIU
The photo in this article is clearly a motorcraft half shaft.
#15
I called Maxtrac last year about using their 2wd spindles to lower a 4wd and they said it would not work. According to them, there is not enough clearance for the 4wd hub to fit into the 2wd spindle opening. I did a 3/5 drop on my 2013 4WD several years ago using a Belltech kit and DJM lower arms and its worked pretty good.
I'm looking into a 2019 4wd RCSB and doing a 3/5 drop, so I'm always on the lookout for a better way.
I'm looking into a 2019 4wd RCSB and doing a 3/5 drop, so I'm always on the lookout for a better way.