Chris_1

iTrader: (1)

The only one I have right now is attached to a pretty good set of buckets. I'll let you know if I get a truck in with a trashed seat.

Ruckin69

Have grey seat moldings? If so, price. Thanks

ricerockett

Greetings Chris..

I'm searching for two fuel pumps for a 95, two wheel drive 4.9 dual tank, model. I've wasted money on two different suppliers one in the good ole U.S. the other in china with the same result. Items for v8 models.

regards...

Chris_1

iTrader: (1)

I'll check out what I've got. Don't quite understand your last line there -"items for v8 models" ??

ricerockett

The last line of items for v8 models means the two different suppliers sent me pumps for v8s...

Thx for your quick reply

Chris_1

iTrader: (1)

Which would be fine, they use the same pump in 95. They changed the pressure rating on the I6 mid 93 to run at at 30 to 45 psi, same as the v8's.
Previous to that they ran at 45 to 60 but by the time your truck was born it had been changed.
I think it may have had to do with the fact that when they changed to the 2 pump system (from 3 pump) they were blowing check valves like crazy on the I6 trucks. They even came up with an in line check valve to deal with all the warranty issues. And then they changed the pressure shortly after.

steve66

hi I have a 96 F250 with a 302 and i"m looking for the water pump bolt that has the guide pin for the a/c bracket to slide onto.Let me know if you have one

Chris_1

iTrader: (1)

No, you'd probably have to buy a set of water pump bolts. Don't know if rock auto would have them, or maybe a speed shop.

MT-Ford

Mine is a 1990 F250 but wondering if you have the dash panel with the overdrive switch by chance?

Like this, Thanks

Chris_1

iTrader: (1)

No I have a few 87-91 dash pieces but nothing with the O/D switch.