Wheel spacer questions
#1
F150 Manic
Thread Starter
Wheel spacer questions
So I've been on here all day searching and have got a couple of questions. I have aftermarket wheels with acorn style lug nuts so do I need hubcentric spacers or not. And I'm not exactly sure which size lug studs I have cause aren't there two different ones on the 2000 models. Thanks ahead for any help you guys can give.
#2
Senior Member
I recently purchased the 2" wheel spacers from "cjbargains" on eBay and I am impressed with them so far! They are also the hub centric ones...on my 00' and 02' my lugs were both the same size 14x2..so I'm not completely sure how you would figure out which you had..
#3
F150 Manic
Thread Starter
I thought that was lug size but wasn't sure. Thanks for info and a seller, ill have to look them up. Do you happen to have any pics of how far your tires stick out with the spacers on?
#4
Senior Member
When I was looking into spacers EVERYONE recommended them! And yes I do there on my computer I will put them up when I get back home! Over a quarter of my tires stick out on the very bottom of my valance and back fenders...IMHO it was exactly what my truck need to give a really mean look!
#7
2012 member
Hubcentric spacers are not a necessity, but they will definitely help your wheel be perfectly centered to the hub. Even with acorn style lugs, there's no guarantee that the aftermarket wheels will be perfectly centered unless the center bore was the same dimension as the stock wheel so it sits hubcentric already. If you're spacing it out over an inch I'd recommend it. I just bought hubcentric wheel adapters from http://www.motorsport-tech.com/ and couldn't be happier... cheers.