Jimboaf

Ok today was a nice day out and I thought i would change my fule filter my truck has 113,000 miles on it with the firstnfule filter on it. I changed the fule filter and now it will not idle, it is getting gas as i drove it down the road thinking that the computer needed to be reset. It still does not idle i disconected the battery for 1hr and tryed again and nothing. The only hing i did was change the fule filter nothing else. Any help would be great.

Venomized

you didnt by accident install it in reverse flow did you?

Jimboaf

No the flow is fine, I drove it down the road at 80mph and no problem it just wont idle.

skizriz

There is a schrader valve on the passenger's side fuel rail. Shut the truck off and see if you can bleed any air out.

Jimboaf

I did bleed it and still wont idle

papa tiger

% !%$

papa tiger

Check fuel pressure, remove and clean Maf sensor. Test throttle position sensor. Isolate individual injectors to see if one or more screens are partially plugged with foreign grit. Try a couple cans of injector cleaner in the tank.