Topic Sponsor
1997 - 2003 Ford F150 General discussion on the Ford 1997 - 2003 F150 truck.

Go Catless with the Gott's o2 sensor mod

Thread Tools
 
Search this Thread
 
Old 02-17-2013, 09:14 PM
  #1  
Resident light whore
Thread Starter
 
BrowningSCrew's Avatar
 
Join Date: Sep 2010
Location: Arkansas
Posts: 31,772
Received 751 Likes on 614 Posts

Default Go Catless with the Gott's o2 sensor mod

I couldnt seem to find any threads about this mod, so I'm making one myself.
What does this mod do? this mod tricks your O2 sensors into thinking that your catalytic converters are still there so you do not throw a code when you cut them off.
How does it work? the spark plug non-foulers restrict the flow of gasses getting to the sensor therefore making it think the cats are still there filtering



Supplies needed-
  • 2 sets of 2 18mm spark plug non-foulers part number 42009
  • PB Blaster or some other rust penetrant
  • 1/2" drill bit and a drill
  • 19mm wrench
  • a set of channel locks
  • ratchet with an 8mm socket
  • a very small flathead screw driver
to start out, unhook the negative battery cable using your 8mm socket

now get under the truck and spray the living crap(for lack of a better phrase) out of the o2 sensors with your penetrating spray

while the PB is doing it's job go get your spark plug non foulers
Go Catless with the Gott's o2 sensor mod-014.jpg
and drill a 1/2" hole in the end of two of them. Careful not to booger your threads. This hole allows the top one to screw over the tip of the sensor shown here
Go Catless with the Gott's o2 sensor mod-015.jpg

After you have your holes drilled go inplug the sensors, use the little screw driver to pop the prong on the plug and relese it.

Unscrew the sensors from the pipe and take them out.

put the drilled out fouler onto the sensor first, tighten it down, then put a non drilled one over it and tightnem it down as well. it will look like this before you put it back in
Go Catless with the Gott's o2 sensor mod-017.jpg

Now screw it back into the pipe, tighten it up, then plug it back in
Go Catless with the Gott's o2 sensor mod-018.jpg

All thats left to do after that is hooking the battery back up.

Before I did this my CEL was on, when I started it up after this it promptly went off. As usual, if You have any questions I am happy to help
The following users liked this post:
James Youmans (08-13-2020)
Old 02-17-2013, 09:36 PM
  #2  
will run you OVER
 
01f1502wd's Avatar
 
Join Date: Mar 2009
Location: Texas
Posts: 5,251
Received 33 Likes on 30 Posts

Default

I agree with this write up. I did the same thing and it worked like a charm, has for alomst 3yrs now
Old 02-17-2013, 09:39 PM
  #3  
Resident light whore
Thread Starter
 
BrowningSCrew's Avatar
 
Join Date: Sep 2010
Location: Arkansas
Posts: 31,772
Received 751 Likes on 614 Posts

Default

Originally Posted by 01f1502wd
I agree with this write up. I did the same thing and it worked like a charm, has for alomst 3yrs now
Glad it'll last, wanted to spread the word since this comes up alot
Old 02-17-2013, 09:43 PM
  #4  
Senior Member
 
gkos_'s Avatar
 
Join Date: Jan 2013
Posts: 485
Received 12 Likes on 12 Posts
Default

Jw how does it trick it tho I did it this morning
I kno it moves it out of the airflow but. Well Yea lol does heat trigger it to then on or something
Old 02-17-2013, 09:43 PM
  #5  
I am the God of hellfire
 
TheKing1985's Avatar
 
Join Date: Nov 2012
Location: Minneapolis, MN
Posts: 1,380
Received 43 Likes on 38 Posts

Default

Sweet right up. Ill pass this on to my friend with deleted cats. Ill be using my tuner to turn the code off, not bragging.
Old 02-17-2013, 09:46 PM
  #6  
Senior Member
 
01burgscab's Avatar
 
Join Date: Jan 2013
Location: New Jersey
Posts: 201
Received 1 Like on 1 Post
Default

Originally Posted by BrowningSCrew

Glad it'll last, wanted to spread the word since this comes up alot
Now idk what state you're in but nj emissions they stick the sniffer in the tailpipe, has anyone passed emissions with this done
Old 02-17-2013, 09:49 PM
  #7  
Resident light whore
Thread Starter
 
BrowningSCrew's Avatar
 
Join Date: Sep 2010
Location: Arkansas
Posts: 31,772
Received 751 Likes on 614 Posts

Default

Originally Posted by 01burgscab

Now idk what state you're in but nj emissions they stick the sniffer in the tailpipe, has anyone passed emissions with this done
This does nothing to the actual emissions content of the exhaust gasses so it may or may not pass the sniff test. Depends on how dirty the exhaust really is.
Old 02-17-2013, 09:50 PM
  #8  
Resident light whore
Thread Starter
 
BrowningSCrew's Avatar
 
Join Date: Sep 2010
Location: Arkansas
Posts: 31,772
Received 751 Likes on 614 Posts

Default

Originally Posted by gkos_
Jw how does it trick it tho I did it this morning
I kno it moves it out of the airflow but. Well Yea lol does heat trigger it to then on or something
Say what? Little lost here lol
Old 02-17-2013, 09:53 PM
  #9  
Senior Member
 
gkos_'s Avatar
 
Join Date: Jan 2013
Posts: 485
Received 12 Likes on 12 Posts
Default

Originally Posted by BrowningSCrew

Say what? Little lost here lol
-.- gf can't translate Haha
Umm how are the o2 sensors triggered
Old 02-17-2013, 09:57 PM
  #10  
Senior Member
 
dmfavata's Avatar
 
Join Date: Aug 2011
Location: Florham Park, NJ
Posts: 431
Received 20 Likes on 19 Posts

Default

Originally Posted by 01burgscab
Now idk what state you're in but nj emissions they stick the sniffer in the tailpipe, has anyone passed emissions with this done
Most inspection stations are really strict in NJ. A bunch of my friends have had their cats removed and they get failed because of emissions, but i do have some friends that have passed.


Quick Reply: Go Catless with the Gott's o2 sensor mod



All times are GMT -4. The time now is 03:11 AM.