When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
CO, I ordered BCA's for it.... but if you have a better source for Japan or US made, I'm all ears.
Brew... The Timken is an SKF in their package, so it's also Chinese.
With olive this crap going on, my sister STILL wants to buy a house in Florida. She has two here, one in TX, and wants another in FL now.
Bill... this is why I replaced the frame..... the bottom pic has a tab missing on the corner that the auger housing bolts to.
Yeah I believe there were 12 Tornadoes from this one thus far. Mannn, just the concern of dodging those successfully is a trip. This storms kicking them out for sure. Grandmother lived in Tampa for at least 20 years and I don't recall anything this bad. She's no longer with us, cousins where just south of there and left for brothers earlier who's north east quite a ways. . They're expecting quite a surge from it. Not the typical area down there for a Hurricane or direct hit anyway,. But yeah, the Tornadoes whipping up are wild for sure.
____________
EDIT: Yeah, the past 6 or 7 press in bearings that I've bought that were Timken had an SKF in the box. I've noticed that a lot of what they are giving RA to use now says "Representative Image" so they can mix suppliers. This one is a F.A.G. bearing - and I'd be fine with that if it were the case.
Last edited by white89gt; Oct 9, 2024 at 09:36 PM.
