Show'em Off!!! Post up 97-03 trucks!
So looks as if I'm going to be taking my truck to get the new headlights installed...I took one of my current headlights out and the wiring the company had to do to install them needs to be changed back to the original wiring...the LEDs and halo light had to be wired differently to add the LEDs and for high/low beams and I'm not about to screw things up...electrical work is definitely not my expertise...tail lights should be a piece of cake just as long as they don't leak
Big Red
Just gonna let it up to the professionals who installed the old heads require things back to original...I don't mind spending the money rather than pay more to fix my mistakes..I don't mind wiring new stuff but changing and removing/adding no thanks
Last edited by Adams21; 03-03-2015 at 03:11 PM.
Senior Member
Cuting splicing and soldering is all it really takes. And don't forget heat shrink over the wire before you solder it. It's not as bad as one might think. To be honest I felt the same way you do about wiring as I did before I ever did it. It's really not that bad or much to it.
Senior Member
Senior Member
Big Red
Cuting splicing and soldering is all it really takes. And don't forget heat shrink over the wire before you solder it. It's not as bad as one might think. To be honest I felt the same way you do about wiring as I did before I ever did it. It's really not that bad or much to it.