Show'em Off!!! Post up 97-03 trucks!
Senior Member
Not sure if I posted in here or not.
Here are two of my past trucks.
Red 03 SuperCab FX4 5.4L - 6" Fabtech with larger block in rear to level off, 3" PA Body Lift with 37x12.50 BFG M/Ts.
White 03 SuperCrew FX4 5.4L - 6" Fabtech with larger block in rear to level off, 3" PA Body Lift, Torsion Keys, Procomp Add-A-Leaf with 38X15.50 Toyo M/Ts.
Wayne
Here are two of my past trucks.
Red 03 SuperCab FX4 5.4L - 6" Fabtech with larger block in rear to level off, 3" PA Body Lift with 37x12.50 BFG M/Ts.
White 03 SuperCrew FX4 5.4L - 6" Fabtech with larger block in rear to level off, 3" PA Body Lift, Torsion Keys, Procomp Add-A-Leaf with 38X15.50 Toyo M/Ts.
Wayne
cliffords a 4x4
Senior Member
iTrader: (1)
Not sure if I posted in here or not.
Here are two of my past trucks.
Red 03 SuperCab FX4 5.4L - 6" Fabtech with larger block in rear to level off, 3" PA Body Lift with 37x12.50 BFG M/Ts.
White 03 SuperCrew FX4 5.4L - 6" Fabtech with larger block in rear to level off, 3" PA Body Lift, Torsion Keys, Procomp Add-A-Leaf with 38X15.50 Toyo M/Ts.
Wayne
Here are two of my past trucks.
Red 03 SuperCab FX4 5.4L - 6" Fabtech with larger block in rear to level off, 3" PA Body Lift with 37x12.50 BFG M/Ts.
White 03 SuperCrew FX4 5.4L - 6" Fabtech with larger block in rear to level off, 3" PA Body Lift, Torsion Keys, Procomp Add-A-Leaf with 38X15.50 Toyo M/Ts.
Wayne
Senior Member
Ever thought about making some? Some thin sheet metal, a cutting wheel and some self tappers is all you should need. Use some cardboard for a template and paint or under coat the final product for a finished look. I think I will do the body lift, but first I've gotta get gears.
Senior Member
The red truck took 1st place in the New Orleans 2004 World of Wheels. 2 months later a drunk driver ran a stop side and I T-Boned him doing about 45mph.
The white truck had a 2003 Lightning motor pushing 331RWHP/411RWTQ and ran 14.56s @ 91MPH in the 1320. It has a 13sec pass in it but sold it before working more on the tune.
As far as the body lift goes. It makes working on the truck ALOT easier. Just make sure the bolts are tight tight and if you can weld the bed supports to the bottom of the bed vs bolting them. And get or make gap guards!!
Only buy a PA kit!
Wayne
The white truck had a 2003 Lightning motor pushing 331RWHP/411RWTQ and ran 14.56s @ 91MPH in the 1320. It has a 13sec pass in it but sold it before working more on the tune.
As far as the body lift goes. It makes working on the truck ALOT easier. Just make sure the bolts are tight tight and if you can weld the bed supports to the bottom of the bed vs bolting them. And get or make gap guards!!
Only buy a PA kit!
Wayne
Senior Member
The red truck took 1st place in the New Orleans 2004 World of Wheels. 2 months later a drunk driver ran a stop side and I T-Boned him doing about 45mph.
The white truck had a 2003 Lightning motor pushing 331RWHP/411RWTQ and ran 14.56s @ 91MPH in the 1320. It has a 13sec pass in it but sold it before working more on the tune.
As far as the body lift goes. It makes working on the truck ALOT easier. Just make sure the bolts are tight tight and if you can weld the bed supports to the bottom of the bed vs bolting them. And get or make gap guards!!
Only buy a PA kit!
Wayne
The white truck had a 2003 Lightning motor pushing 331RWHP/411RWTQ and ran 14.56s @ 91MPH in the 1320. It has a 13sec pass in it but sold it before working more on the tune.
As far as the body lift goes. It makes working on the truck ALOT easier. Just make sure the bolts are tight tight and if you can weld the bed supports to the bottom of the bed vs bolting them. And get or make gap guards!!
Only buy a PA kit!
Wayne
Ever thought about making some? Some thin sheet metal, a cutting wheel and some self tappers is all you should need. Use some cardboard for a template and paint or under coat the final product for a finished look. I think I will do the body lift, but first I've gotta get gears.
Resident light whore
The red truck took 1st place in the New Orleans 2004 World of Wheels. 2 months later a drunk driver ran a stop side and I T-Boned him doing about 45mph.
The white truck had a 2003 Lightning motor pushing 331RWHP/411RWTQ and ran 14.56s @ 91MPH in the 1320. It has a 13sec pass in it but sold it before working more on the tune.
As far as the body lift goes. It makes working on the truck ALOT easier. Just make sure the bolts are tight tight and if you can weld the bed supports to the bottom of the bed vs bolting them. And get or make gap guards!!
Only buy a PA kit!
Wayne
The white truck had a 2003 Lightning motor pushing 331RWHP/411RWTQ and ran 14.56s @ 91MPH in the 1320. It has a 13sec pass in it but sold it before working more on the tune.
As far as the body lift goes. It makes working on the truck ALOT easier. Just make sure the bolts are tight tight and if you can weld the bed supports to the bottom of the bed vs bolting them. And get or make gap guards!!
Only buy a PA kit!
Wayne
If I were to do it I'd definitely be grabbing some garden liner. It's a cheap simple thing that'll make the BL disappear. These trucks are one of the few that can pull off a body lift
Senior Member
Wayne