Finnish

I'm about to order a lift kit for my 1999 5.4 2WD. Should I go for the 7.5 inch Fabtech or the 6 inch RCD kit?

I plan to put on 33s.
Is the rear block for the RCD kit 3 or 4 inches?

Thanks in advance!!

pizzaman711

If your doing 33's I would go with the 6", if you ever plan go go to 35's though you'll probably regret not getting the 7.5". But for 33's you could do a spindle lift and most likely be fine depending on wheel choice.

ktm-ford

They are both a bit over board for 33"s i would get a 4" lift if you want 33"s 6" and 7.5" would be good for 35"s

Finnish

I'm leaning towards the 6 inch but I have a bad feeling I'll regret it if I decide to get 35s. Does anyone know if the RCD kit is a 3 or 4 inch rear block? Google isn't helping.

Dholla

Anything over a three inch lift you'll need 35s. 33s look smaller than i would like and I have only a 3 inch lift

Finnish

2wds sit about 2 inches lower than a stock 4x4

I just looked up the RCD kit and it says the blocks are only 2 inches??? That can't be right?

pizzaman711

And you'll need 5.5-6.5" to properly clear 35's depending on wheel and tire choice.