Pro comp 4" or Rough Contry 5" lift
10-05-2012, 06:41 PM
#21
99fordman
Thread Starter
Originally Posted by MyFX4Project
Cant wait to see what you decide on. I want a suspension lift on top of my body lift but dont want a 6 inch or 9 inches total haha
The following users liked this post:
Carcrazygts2 (10-05-2012)
10-11-2012, 01:06 AM
#23
nice truck too. i may consider the procomp suspension lift
10-11-2012, 10:54 AM
#24
Senior Member
Just go big and do a 6in suspension. 3in body And crank your keys and do custom rear springs. I'm waiting on my springs for the rear but here's just rear blocks sits and inch or 2 to low. Springs will be custom 10in springs an will take the factory block out and just have shims for the right angle. And zone makes a good lift for the front. But their u bolts and blocks suck
10-11-2012, 11:55 AM
#25
Originally Posted by Toys-N-Joys
what rims are those?
nice truck too. i may consider the procomp suspension lift
10-11-2012, 12:07 PM
#27
10" rear leafs are going to leave about 1.5" high in the rear Depending on what company you went with. I wanna try to completly swich to six lug permenantly. I may try doing a axle swap, then see what I can do about using the newer style knuckles and brakes and stuff. I've already check and the 97-03 truck share the same outer joints as a 04-06.
10-11-2012, 01:35 PM
#28
Senior Member
Originally Posted by Carcrazygts2
10" rear leafs are going to leave about 1.5" high in the rear Depending on what company you went with. I wanna try to completly swich to six lug permenantly. I may try doing a axle swap, then see what I can do about using the newer style knuckles and brakes and stuff. I've already check and the 97-03 truck share the same outer joints as a 04-06.