New Moog Lower ball joint loose
#1
Junior Member
Thread Starter
New Moog Lower ball joint loose
2001 F150 XLT regular cab 2WD
I bought 2 new lower ball joints Moog K8695T.
On installation they start tight and once seated fully they are loose and move around in the hole. I have tried both new ball joints to see if one of them might have been made a little bit out of tolerance.
The old ball joint was worn out but fit in the hole tightly.
Any suggestions?
Thanks
I bought 2 new lower ball joints Moog K8695T.
On installation they start tight and once seated fully they are loose and move around in the hole. I have tried both new ball joints to see if one of them might have been made a little bit out of tolerance.
The old ball joint was worn out but fit in the hole tightly.
Any suggestions?
Thanks
#3
Now an XLT in Colorado
Moog makes two LBJ's for our trucks. One is a few thousandths larger than stock to deal with exactly this issue.
#4
Senior Member