My turn to ask something
#22
Senior Member
Thread Starter
#25
Senior Member
Thread Starter
lets see if I am seeing these right.
bottom pic white, white w/black stripe, and blue w/red stripe'
top pic black, blue w/red stripe and red wire
I'm having a bit of problem making out the actual colors of the end ones on the bottom picture. Do I have them right?
Thank you for your help with this guys. I appreciate it. It's hell when you have 6 black wires with no connector on the end to work off of. Then, of course, with no factory harness to work from, it makes it all the harder.
Again Thanks
bottom pic white, white w/black stripe, and blue w/red stripe'
top pic black, blue w/red stripe and red wire
I'm having a bit of problem making out the actual colors of the end ones on the bottom picture. Do I have them right?
Thank you for your help with this guys. I appreciate it. It's hell when you have 6 black wires with no connector on the end to work off of. Then, of course, with no factory harness to work from, it makes it all the harder.
Again Thanks
#27
Senior Member
http://www.fordf150.net/forums/viewt...p?f=38&t=26655
I still haven't wired my in yet so now you have me wanting to make mine work, that like has what each wire does
I still haven't wired my in yet so now you have me wanting to make mine work, that like has what each wire does
#28
Senior Member
Thread Starter
Thanks everyone who helped get me the information I needed to wire in my overhead console. I got it wired and everything functioning today. It was the proverbial PIA, but it should be worth it in the end. I got the outside ambient working also. I'll cut out the headliner this weekend (wasn't going to cut anything until I knew it would work) and to a final install then. Thanks again, those of you who helped. I really appreciate the assistance. Printed schematics don't do much good, when your harness has 12 black wires, and it is in color. lol