ibd2328

iTrader: (2)

Both cool sides are going to enter the intercoooler and leave the cooling with a 3-1/2 pipe to the 90mm throttle body. I'm buying the maf from sct and plan on outing it in the 1ft straight piece just before the throttle plate.

4x4dave

I can tell you right now he's using the edelbrock victor jr intake manifold with rehicard racing 4.6 to 5.4 adapters.

http://www.edelbrock.com/media/news/...ve/091407.html

Here's a picture I'm stealing from one of his threads on another site:

ibd2328

iTrader: (2)

Nice. What is HP goals.

I am actually tying to order parts right now and its a PITA!

ibd2328

iTrader: (2)

Parts
2X http://www.jegs.com/i/JEGS/555/31819...Fe99OgodES8AOw
Accels COP's
NGK TRG-V plugs(Already have these)
Accufab 90mm throttle body
SCT- Air Mass Meter
SCT- On the Fly Tuner
Manley Connecting Rods - H-Beam Connecting Rods 14060
JE Pistons 8.5 C.R. http://www.livernoismotorsports.com/...125%252d8.html
Stage 2 MMR Turbo Cam
Factory Block
Factory Heads
Factory Crank

ibd2328

iTrader: (2)

Turbos (16T's) are going on my BMW while I search for an alternative for the truck.

Franchi Motorsports

iTrader: (9)

Just as FYI, none of the SCT tuner models are tune on the fly as to be able to retune the truck, truck has to be off while it reprograms the PCM.

ibd2328

iTrader: (2)

That will be just fine Franchi. Meant on the fly with regards to running without my laptop

ibd2328

iTrader: (2)

Waiting on the header plates/flanges to get here to mount the 4 1-5/8" short tubes too.
The plates were only 70 bucks for Jegs performance. 16gauge pipe ran about 90 bucks.

ibd2328

iTrader: (2)

Just need those parts to get here and order two 4 into 1 - 3inch collectors

Carcrazygts2

Go with V-Band style clamps up-pipes, and down pipes.