MH1 fog light retrofit guide
#21
Senior Member
Thread Starter
Everything is finished up. I'll update the how to portion of this thread tonight or tomorrow. I'm really happy with them. I'll get some better pics too
#23
Senior Member
Thread Starter
#24
Looking for a Henway.
iTrader: (2)
Missed that you had finished. Looks good.
It really makes me want to finish mine. I am tired of looking at the holes in my valance where the lights are supposed to be.
Probably won't be till summer though with work and school.
I also still have my wife's Scion I need to do (but I have a spare set of housings, so no rush on those).
You have the TRS D2S projectors in the headlights, right?
Hard to tell from the pics, but looks like you could probably aim the fogs up a little higher (and to me looks like the headlights are too high, but hard to tell from the pic
It really makes me want to finish mine. I am tired of looking at the holes in my valance where the lights are supposed to be.
Probably won't be till summer though with work and school.
I also still have my wife's Scion I need to do (but I have a spare set of housings, so no rush on those).
You have the TRS D2S projectors in the headlights, right?
Hard to tell from the pics, but looks like you could probably aim the fogs up a little higher (and to me looks like the headlights are too high, but hard to tell from the pic
#25
Senior Member
Thread Starter
MH1 fog light retrofit guide
Missed that you had finished. Looks good.
It really makes me want to finish mine. I am tired of looking at the holes in my valance where the lights are supposed to be.
Probably won't be till summer though with work and school.
I also still have my wife's Scion I need to do (but I have a spare set of housings, so no rush on those).
You have the TRS D2S projectors in the headlights, right?
Hard to tell from the pics, but looks like you could probably aim the fogs up a little higher (and to me looks like the headlights are too high, but hard to tell from the pic
It really makes me want to finish mine. I am tired of looking at the holes in my valance where the lights are supposed to be.
Probably won't be till summer though with work and school.
I also still have my wife's Scion I need to do (but I have a spare set of housings, so no rush on those).
You have the TRS D2S projectors in the headlights, right?
Hard to tell from the pics, but looks like you could probably aim the fogs up a little higher (and to me looks like the headlights are too high, but hard to tell from the pic
#27
Senior Member
Thread Starter
That will kinda work. It will look good on the wall at like 25 feet, but the fog light cut off will be shinning way above the headlights at like 100 feet because of the angle they are at. I originally did it to where I just thought it was straight out, then I hoped on the interstate later that night and I was lighting up the over head road signs way down the road. Now I have the the cut off aimed 1 inch below the center of the light and it's perfect, I can see the road better too since they are aimed lower. And now the cut offs don't cross
#29
Senior Member
Thread Starter
Part of one of my Xb halos just went out the other day :/ not even a year old too. You are doing ls460s right?
#30
Looking for a Henway.
iTrader: (2)
That will kinda work. It will look good on the wall at like 25 feet, but the fog light cut off will be shinning way above the headlights at like 100 feet because of the angle they are at. I originally did it to where I just thought it was straight out, then I hoped on the interstate later that night and I was lighting up the over head road signs way down the road. Now I have the the cut off aimed 1 inch below the center of the light and it's perfect, I can see the road better too since they are aimed lower. And now the cut offs don't cross
But as you have found, until you get them mounted and drive with it, kind of hard to figure out.