Lowering 4x4? pics of lowered 4x4?
#11
Member
Thread Starter
ok after a bit of research i found out what i will need for the parts to lower my 4x4.
http://www.ebay.com/itm/1997-2003-FO...f734fb&vxp=mtr
hanger drop kit ^
http://www.ebay.com/itm/ROX-97-03-Fo...54b665&vxp=mtr
drop shackles ^
http://www.ebay.com/itm/FORD-97-F150...6bc87c&vxp=mtr
torsion keys lowering ^
and it should look like coobies5 truck.
http://www.f150online.com/forums/mem...-+coobies.html here is his online garage
http://www.ebay.com/itm/1997-2003-FO...f734fb&vxp=mtr
hanger drop kit ^
http://www.ebay.com/itm/ROX-97-03-Fo...54b665&vxp=mtr
drop shackles ^
http://www.ebay.com/itm/FORD-97-F150...6bc87c&vxp=mtr
torsion keys lowering ^
and it should look like coobies5 truck.
http://www.f150online.com/forums/mem...-+coobies.html here is his online garage
#13
Member
Thread Starter
i think its more than that. about 4-5" front and removing blocks 2", drop hangers 2" and drop shackles 2" so total 6-7" in rear
so a 5/7 drop or 4/6 whatever it is i will measure it.
i have to add 2wd u bolts to list too. when i remove blocks i need shorter bolts
so a 5/7 drop or 4/6 whatever it is i will measure it.
i have to add 2wd u bolts to list too. when i remove blocks i need shorter bolts
#14
Just put the block ontop of the leafs and tie them down that's how I had if for a 1.5 years
#15
Member
Thread Starter
The following users liked this post:
Toys-N-Joys (03-09-2013)
#18
Member
Thread Starter
amazing truck. thanks for posting it.
thats the same height i want to drop my truck.
i wish i could afford nice wheels and paint. but i cant.
i am going for OEM lincoln navigator parts. front end, seats, center console, steering wheel, floor mats, 17" alloys, maybe radio. i want it like a luxury truck. i want it to cruise on roads better, look and feel nicer.....the bench seats hurt my back too on longer drives. basically 2 door lincoln blackwood that was never made by ford.
Uploaded with ImageShack.us
i want this front end on your friends truck above. or same ride height
#19
Member
Thread Starter
looks like i may need to adjust the pinion angle too. about 6degrees if i lower 6" in rear. should be easy to install but more $$$$ to consider