Topic Sponsor
1997 - 2003 Ford F150 General discussion on the Ford 1997 - 2003 F150 truck.

Looking for a good eFan for my 4.2

Old 05-02-2013, 10:22 AM
  #1  
Member
Thread Starter
 
tyler_603's Avatar
 
Join Date: Jun 2012
Posts: 74
Likes: 0
Received 1 Like on 1 Post
Default Looking for a good eFan for my 4.2

I was wondering how many cfms I should get some say 3k and some say 2k so idk? What brand? I do t want any junk yard crap on my truck so I'm thinkin flexalite?
Old 05-02-2013, 11:08 AM
  #2  
4.2
Senior Member
 
4.2's Avatar
 
Join Date: Jun 2010
Posts: 292
Received 11 Likes on 10 Posts
Default

If you don't want any "junkyard crap" then yes, Flex-a-lite will be your best bet for quality. It doesn't take much to cool this motor down so 3,000 cfm or similar would be plenty sufficient. My "junkyard crap" has been working fine for the past 2 years at more than half the cost, just some food for thought...
Old 05-02-2013, 12:17 PM
  #3  
Senior Member
 
jollyroger331's Avatar
 
Join Date: Apr 2012
Location: Garden City MI
Posts: 2,137
Received 160 Likes on 148 Posts
Default

My junk yard crap has been working great for almost a year, of course I did get lucky and find a less than 1year old tyc fan that had been installed as a replacement. $25 but hey to each his own. If you have money to burn by all means do so.
Old 05-02-2013, 04:57 PM
  #4  
Member
Thread Starter
 
tyler_603's Avatar
 
Join Date: Jun 2012
Posts: 74
Likes: 0
Received 1 Like on 1 Post
Default

I should correct my statement I'm not saying all junk yard stuff is bad but the yards around hear suck! What fans did u guys get from the junk yard? I can't really afford big expensive fans either but I mean I don't want to start overheating my truck with something that's crap u know I guess that's the gamble! I'm new to this so idk how big the fans need to be or how many cfms or what brand.. I would think 3000cfm Is sufficient!
Old 05-02-2013, 05:55 PM
  #5  
4v > 2v
 
MyFX4Project's Avatar
 
Join Date: Jan 2012
Location: Kansas
Posts: 4,975
Received 97 Likes on 91 Posts
Default

I've got 3.8l ford windstar fans pulled from a junkyard. I know at least 3 other people using the same fans and none of us have had any problems. I'd start with that, then decide in what controller you want.
Old 05-02-2013, 07:05 PM
  #6  
Member
Thread Starter
 
tyler_603's Avatar
 
Join Date: Jun 2012
Posts: 74
Likes: 0
Received 1 Like on 1 Post
Default

I think I'll get the contour fans! What all do I need to get to wire them up? Is there a way to have one work if the other one kills over or do they need to both run at the same time? And is there a way to make them slowly come on instead of the relay just turning on and off cuz that may jolt the system? Jw
Old 05-02-2013, 08:32 PM
  #7  
Will work for parts
 
ghostrider's Avatar
 
Join Date: Feb 2008
Location: Everything is bigger in Texas
Posts: 783
Received 24 Likes on 22 Posts

Default

Look at the madfan's mine has been great. It's basically a mustang fan flipped and fits a stock f150 shroud. Mike the owner and developer has the BEST customer service I have ever dealt with ever.

It also controls the currant draw on startup and has an adjustable thermostat. Clean install, perfect customer service, and great cooling all in one stop. Last summer I was stopped in traffic for 2 hours in 105 degree temps and the gauge never moved with the air blowing on high.
Old 05-02-2013, 08:40 PM
  #8  
Member
Thread Starter
 
tyler_603's Avatar
 
Join Date: Jun 2012
Posts: 74
Likes: 0
Received 1 Like on 1 Post
Default

Do you have the 4.2 also
Old 05-02-2013, 10:08 PM
  #9  
Will work for parts
 
ghostrider's Avatar
 
Join Date: Feb 2008
Location: Everything is bigger in Texas
Posts: 783
Received 24 Likes on 22 Posts

Default

No it's a built 4.6 but the shroud is the same.
Old 05-02-2013, 10:26 PM
  #10  
Member
Thread Starter
 
tyler_603's Avatar
 
Join Date: Jun 2012
Posts: 74
Likes: 0
Received 1 Like on 1 Post
Default

We're can I get one of those fans

Thread Tools
Search this Thread
Quick Reply: Looking for a good eFan for my 4.2



All times are GMT -4. The time now is 04:33 PM.