Lets see ur truck flexing on other vehicles!
#11
#12
#13
Senior Member
Thread Starter
#14
Get two tens well unless you need the one seat that flips up cause hmthats where the power amp goes in my truck you could easily put 1 ten under the seats and put the power amp under there too
#15
#16
Senior Member
Thread Starter
315/70/r17s and I used Vht black wheel paint. Sanded with 320 grit sand paper. Wiped them down with wax and grease remover. Let it dry and put 3 to 4 coats on. Let it almost dry between coats depending on the temp outside. Mine I gave about 3-5 mins in between coats. It was bout 88 degrees outside. After ur last coat let it set a few mins and start pulling the tape off carefully. Let it dry a good 24 hours before u really touch it. U want ur paint to cure good so it sticks to the wheels good.
#17
#18
Senior Member
Thread Starter
I love my kicker door speakers. My truck don't have any factory audio in it lol it's all been replaced. An I'm going to downgrade to some 8s when I feel like spending a lil money. No one ever rides in my back seat. Here's the door speakers I got. They were cheaper but they sound great.
#19
315/70/r17s and I used Vht black wheel paint. Sanded with 320 grit sand paper. Wiped them down with wax and grease remover. Let it dry and put 3 to 4 coats on. Let it almost dry between coats depending on the temp outside. Mine I gave about 3-5 mins in between coats. It was bout 88 degrees outside. After ur last coat let it set a few mins and start pulling the tape off carefully. Let it dry a good 24 hours before u really touch it. U want ur paint to cure good so it sticks to the wheels good.
#20
Senior Member
Thread Starter